REGRESSION: Perf dashboard sometimes fails to update zooming level

[WebKit-https.git] / Websites / perf.webkit.org / ChangeLog

2015-04-03  Ryosuke Niwa  <rniwa@webkit.org>

        REGRESSION: Perf dashboard sometimes fails to update zooming level
        https://bugs.webkit.org/show_bug.cgi?id=143359

        Reviewed by Darin Adler.

        The bug was caused by various bugs that ended up in an exception.

        * public/v2/app.js:
        (App.Pane._handleFetchErrors): Removed superfluous console.log.
        (App.Pane.computeStatus): Fixed the bug in r182185 that previousPoint could be null.
        (App.PaneController.actions.zoomed): Update the overview when the main chart triggered a zoom.
        * public/v2/index.html: Replaced all instances of href="#" by href="javascript:false" to avoid navigating
        to # when Ember.js fails to attach event listeners on time.
        * public/v2/interactive-chart.js:
        (App.InteractiveChartComponent._updateDimensionsIfNeeded): Avoid using a negative width or height when
        the containing element's size is 0.
        (App.InteractiveChartComponent._updateBrush): Ditto.

2015-04-02  Ryosuke Niwa  <rniwa@webkit.org>

        Perf dashboard should have UI to test out anomaly detection strategies
        https://bugs.webkit.org/show_bug.cgi?id=143290

        Reviewed by Benjamin Poulain.

        Added the UI to select anomaly detection strategies. The detected anomalies are highlighted in the graph.

        Implemented the Western Electric Rules 1 through 4 in http://en.wikipedia.org/wiki/Western_Electric_rules
        as well as Welch's t-test that compares the last five points to the prior twenty points.

        The latter is what Mozilla uses (or at least did in the past) to detect performance regressions on their
        performance tests although they compare medians instead of means.

        All of these strategies don't quite work for us since our data points are too noisy but this is a good start.

        * public/v2/app.js:
        (App.Pane.updateStatisticsTools): Clone anomaly detection strategies.
        (App.Pane._updateMovingAverageAndEnvelope): Highlight anomalies detected by the enabled strategies.
        (App.Pane._movingAverageOrEnvelopeStrategyDidChange): Observe changes to anomaly detection strategies.
        (App.Pane._computeMovingAverageAndOutliers): Detect anomalies by each strategy and aggregate results.
        Only report the first data point when multiple consecutive data points are detected as anomalies.
        * public/v2/chart-pane.css: Updated styles.
        * public/v2/index.html: Added the pane for selecting anomaly detection strategies.
        * public/v2/js/statistics.js:
        (Statistics.testWelchsT): Added. Implements Welch's t-test.
        (.sampleMeanAndVarianceForValues): Added.
        (.createWesternElectricRule): Added.
        (.countValuesOnSameSide): Added.
        (Statistics.AnomalyDetectionStrategy): Added.

2015-03-31  Ryosuke Niwa  <rniwa@webkit.org>

        REGRESSION: Searching commits can highlight wrong data points
        https://bugs.webkit.org/show_bug.cgi?id=143272

        Reviewed by Antti Koivisto.

        The bug was caused by /api/commits returning commit times with millisecond precision whereas /api/runs
        return commit times with only second precision. This resulted in the frontend code to match a commit
        with the data point that included the next commit when the millisecond component of commit's timestamp
        wasn't identically 0.

        This discrepancy was caused by the fact PHP's strtotime only ignores milliseconds and /api/commits
        was returning timestamp as string instead of parsing via Database::to_js_time as done in /api/runs
        so miliseconds component was only preserved in /api/commits.

        Fixed the bug by always using Database::to_js_time to return commit time. Also fixed to_js_time so that
        it returns time in milisecond precision.

        * public/api/commits.php:
        (fetch_commits_between): Use Database::to_js_time for format commit times.
        (format_commit): Ditto.
        * public/include/db.php:
        (Database::to_js_time): Parse and append millisecond component. Ignore sub-milliseconds for simplicity.
        * public/v2/data.js:
        (CommitLogs.fetchForTimeRange): The commit time is now an integer so don't call "replace" on it.

2015-03-31  Ryosuke Niwa  <rniwa@webkit.org>

        Perf dashboard should show relative change in values
        https://bugs.webkit.org/show_bug.cgi?id=143252

        Reviewed by Antti Koivisto.

        When a range of values are selected, show the percentage difference between the start and the end
        in addition to the absolute value difference. When a single point is selected, show the relative
        difference with respect to the previous point. Use two significant figures and always show plus sign
        when the difference is positive.

        * public/v2/app.js: Compute and format the relative difference.
        * public/v2/chart-pane.css: Don't let commits view shrink itself when they're all collapsed.
        * public/v2/index.html: Show the relative difference.

2015-03-31  Ryosuke Niwa  <rniwa@webkit.org>

        REGRESSION(r180000): Changing moving average or enveloping strategy doesn't update the graph
        https://bugs.webkit.org/show_bug.cgi?id=143254

        Reviewed by Antti Koivisto.
        
        The bug was caused by App.Pane no longer replacing 'chartData' property when updating the moving average
        or the enveloping values. Fixed the bug by creating a new chartData object when the strategy is changed
        so that the interactive chart component will observe a change to 'chartData'.

        * public/v2/app.js:
        (App.Pane._movingAverageOrEnvelopeStrategyDidChange): Added.

2015-03-19  Ryosuke Niwa  <rniwa@webkit.org>

        Unreviewed build fixes.

        * public/include/manifest.php:
        (Manifest::generate): These should be {} instead of [] when they're empty.
        * public/v2/data.js:
        (Measurement.prototype.formattedRevisions): Don't assume previousRevisions[repositoryId] exits.
        * public/v2/manifest.js:
        (App.Metric.fullName): Fixed the typo.
        * tests/admin-regenerate-manifest.js: Fixed the test.

2015-02-20  Ryosuke Niwa  <rniwa@webkit.org>

        Commit the erroneously reverted change.

        * public/api/runs.php:
        (RunsGenerator::results): 

2015-02-20  Ryosuke Niwa  <rniwa@webkit.org>

        Loading the perf dashboard takes multiple seconds
        https://bugs.webkit.org/show_bug.cgi?id=141860

        Reviewed by Andreas Kling.

        This patch introduces the caches of JSON files returned by /api/ in /data/ directory. It also records
        the last time test_runs rows associated with the requested platforms and metrics are inserted, updated,
        or removed in the caches as well as the manifest JSON files ("last modified time"). Because the manifest
        is regenerated each time a new test result is reported, the front end can compare last modified time in
        the manifest file with that in a /api/runs JSON cache to detect the stale-ness.

        More concretely, the front end first optimistically fetches the JSON in /data/. If the cache doesn't exit
        or the last modified time in the cache doesn't match with that in the manifest file, it would fetch it
        again via /api/runs. In the case the cache did exist, we render the charts based on the cache meanwhile.
        This dramatically reduces the perceived latency for the page load since charts are drawn immediately using
        the cache and we would only re-render the charts as new up-to-date JSON comes in.

        This patch also changes the format of runs JSONs by pushing the exiting properties into 'configurations'
        and adding 'lastModified' and 'elapsedTime' at the top level.

        * init-database.sql: Added config_runs_last_modified to test_configurations table as well as a trigger to
        auto-update this column upon changes to test_runs table.

        * public/admin/test-configurations.php:
        (add_run): Regenerate the manifest file to invalidate the /api/runs JSON cache.
        (delete_run): Ditto.

        * public/api/runs.php:
        (main): Fetch all columns of test_configurations table including config_runs_last_modified. Also generate
        the cache in /data/ directory.
        (RunsGenerator::__construct): Compute the last modified time for this (platform, metric) pair.
        (RunsGenerator::results): Put the old content in 'configurations' property and include 'lastModified' and
        'elapsedTime' properties. 'elapsedTime' is added for debugging purposes.
        (RunsGenerator::add_runs):
        (RunsGenerator::parse_revisions_array):

        * public/include/db.php:
        (CONFIG_DIR): Added.
        (generate_data_file): Added based on ManifestGenerator::store.
        (Database::to_js_time): Extracted from RunsGenerator::add_runs to share code.

        * public/include/json-header.php:
        (echo_success): Renamed from success_json. Return the serialized JSON instead of echo'ing it so that we can
        generate caches in /api/runs/.
        (exit_with_success):

        * public/include/manifest.php:
        (ManifestGenerator::generate): Added 'elapsedTime' property for the time taken to generate the manifest.
        It seems like we're generating it in 200-300ms for now so that's good.
        (ManifestGenerator::store): Uses generate_data_file.
        (ManifestGenerator::platforms): Added 'lastModified' array to each platform entry. This array contains the
        last modified time for each (platform, metric) pair.

        * public/index.html:
        (fetchTest): Updated per the format change in runs JSON.

        * public/v2/app.js:
        (App.Pane._fetch): Fetch the cached JSON first. Refetch the uncached version if instructed as such.
        (App.Pane._updateChartData): Extracted from App.Pane._fetch.
        (App.Pane._handleFetchErrors): Ditto.

        * public/v2/data.js:
        (RunsData.fetchRuns): Takes the fourth argument indicating whether we should fetch the cached version or not.
        The cached JSON is located in /data/ with the same filename. When fetching a cached JSON results in 404,
        fulfill the promise with null as the result instead of rejecting it. The only client of this function which
        sets useCache to true is App.Manifest.fetchRunsWithPlatformAndMetric, and it handles this special case.

        * public/v2/manifest.js:
        (App.DateArrayTransform): Added. Handles the array of last modified dates in platform objects.
        (App.Platform.lastModifiedTimeForMetric): Added. Returns the last modified date in the manifest JSON.
        (App.Manifest.fetchRunsWithPlatformAndMetric): Takes "useCache" like RunsData.fetchRuns. Set shouldRefetch
        to true if response is null (the cache didn't exit) or the cache is out-of-date.
        (App.Manifest._formatFetchedData): Extracted from App.Manifest.fetchRunsWithPlatformAndMetric.

        * run-tests.js:
        (initializeDatabase): Avoid splitting function definitions in the middle.

        * tests/api-report.js: Added tests to verify that reporting new test results updates the last modified time
        in test_configurations.

2015-02-20  Ryosuke Niwa  <rniwa@webkit.org>

        REGRESSION(r180333): Analysis tasks can't be associated with bugs
        https://bugs.webkit.org/show_bug.cgi?id=141858

        Reviewed by Andreas Kling.

        Added back the erroneously removed table to associate bugs. Also moved "details-table-container" div outside
        of the chart-details partial template as it needs to wrap associate bugs in analysis task pages.

        * public/v2/chart-pane.css:
        * public/v2/index.html:

2015-02-20  Ryosuke Niwa  <rniwa@webkit.org>

        Selecting revisions for A/B testing is hard
        https://bugs.webkit.org/show_bug.cgi?id=141824

        Reviewed by Andreas Kling.

        Update the revisions used in A/B testing based on the selection in the overview chart. This allows users to
        intuitively select revisions based on points shown in the chart. Removed the old select elements used to
        select A/B testing points manually.

        Also renamed 'testSets' to 'configurations', 'roots' to 'rootConfigurations', and 'revisions' in each root's
        sets to 'options' for clarity.

        * public/v2/app.css: Reorganized style rules. 

        * public/v2/app.js:
        (App.AnalysisTaskController):
        (App.AnalysisTaskController._taskUpdated): Merged updateTestGroupPanes.
        (App.AnalysisTaskController._chartDataChanged): Renamed from paneDomain. It's now an observer instead of
        a property, which sets 'overviewDomain' property as well as other properties.
        (App.AnalysisTaskController.updateRootConfigurations): Renamed from updateRoots.
        (App.AnalysisTaskController._updateRootsBySelectedPoints): Added. Select roots based on the selected points
        in the overview chart.

        * public/v2/chart-pane.css: Added arrows next to the configuration names (e.g. 'A') to indicate whether
        individual build requests / test results are shown or not.

        * public/v2/index.html: Removed the select element per configuration column. Also moved the select element
        for the number of runs as it doesn't belong in the same table as the one that lists repositories and roots.

2015-02-20  Ryosuke Niwa  <rniwa@webkit.org>

        Unreviewed test fixes after r179037, r179591, and r179763.

        * tests/admin-regenerate-manifest.js:
        * tests/admin-reprocess-report.js:

2015-02-19  Ryosuke Niwa  <rniwa@webkit.org>

        Relationship between A/B testing results are unclear
        https://bugs.webkit.org/show_bug.cgi?id=141810

        Reviewed by Andreas Kling.

        Show a "reference chart" indicating which two points have been tested in each test group pane.

        Now the chart shown at the top of an analysis task page is called the "overview pane", and we use the pane
        and the domain used in this chart to show charts in each test group.

        Also renamed an array of revisions used in the A/B test results tables from 'revisions' to 'revisionList'.

        * public/v2/analysis.js:
        (App.TestGroup._fetchTestResults): Renamed from _fetchChartData. Set 'testResults' instead of 'chartData'
        since this is the results of A/B testing results, not the data for charts shown next to them.

        * public/v2/app.css: Added CSS rules for reference charts.

        * public/v2/app.js:
        (App.AnalysisTaskController.paneDomain): Set 'overviewPane' and 'overviewDomain' on each test group pane.
        (App.TestGroupPane._populate): Updated per 'chartData' to 'testResults' rename.
        (App.TestGroupPane._updateReferenceChart): Get the chart data via the overview pane and find points that
        identically matches root sets. If one of configuration used a set of revisions for which no measurement
        was made in the original chart, don't show the reference chart as that would be misleading / confusing.
        (App.TestGroupPane._computeRepositoryList): Updated per 'chartData' to 'testResults' rename.
        (App.TestGroupPane._createConfigurationSummary): Ditto. Also renamed 'revisions' to 'revisionList'.
        In addition, renamed 'buildNumber' to 'buildLabel' and prefixed it with "Build ".

        * public/v2/data.js:
        (Measurement.prototype.revisionForRepository): Added.
        (Measurement.prototype.commitTimeForRepository): Cleanup.
        (TimeSeries.prototype.findPointByRevisions): Added. Finds a point based on a set of revisions.

        * public/v2/index.html: Added the reference chart. Streamlined the status label for each build request
        by including the build number in the title attribute instead of in the markup.

        * public/v2/interactive-chart.js:
        (App.InteractiveChartComponent._updateDomain): Fixed a typo introduced as a consequence of r179913.
        (App.InteractiveChartComponent._computeYAxisDomain): Expand the y-axis to show the highlighted points.
        (App.InteractiveChartComponent._highlightedItemsChanged): Adjust the y-axis as needed.

2015-02-18  Ryosuke Niwa  <rniwa@webkit.org>

        Analysis task pages are unusable
        https://bugs.webkit.org/show_bug.cgi?id=141786

        Reviewed by Andreas Kling.

        This patch makes following improvements to analysis task pages:
        1. Making the main chart interactive. This change required the use of App.Pane as well as moving the code to
        compute the data for the details pane from PaneController.
        2. Moving the form to add a new test group to the top of test groups instead of the bottom of them.
        3. Grouping the build requests in each test group by root sets instead of the order by which they were ran.
        This change required the creation of App.TestGroupPane as well as its methods.
        4. Show a box plot for each root set configuration as well as each build request. This change required
        App.BoxPlotComponent.
        5. Show revisions of each repository (e.g. WebKit) for each root set and build request.

        * public/api/build-requests.php:
        (main): Update per the rename of BuildRequestsFetcher::root_sets to BuildRequestsFetcher::root_sets_by_id.

        * public/api/test-groups.php:
        (main): Include root sets and roots in the response.
        (format_test_group):

        * public/include/build-requests-fetcher.php:
        (BuildRequestsFetcher::root_sets_by_id): Renamed from root_sets.
        (BuildRequestsFetcher::root_sets): Added.
        (BuildRequestsFetcher::roots): Added.
        (BuildRequestsFetcher::fetch_roots_for_set): Takes a boolean argument $resolve_ids. This flag is only set to
        true in /api/build-requests/ (as done prior to this patch) to use repository names as identifiers since
        tools/sync-with-buildbot.py can't convert repository names to their ids.

        * public/v2/analysis.js:
        (App.Root): Added.
        (App.RootSet): Added.
        (App.RootSet.revisionForRepository): Added.
        (App.TestGroup.rootSets): Deleted the code to compute root set ids from build requests now that the JSON
        response at /api/test-groups will include them.
        (App.BuildRequest): Ditto. Also deleted 'configLetter' property, which has been moved to a proxy created by
        _createConfigurationSummary.
        (App.BuildRequest.statusLabel): Use 'Completed' as the human readable label for 'completed' status.
        (App.BuildRequest.aggregateStatuses): Added. Generates a human readable status for a set of build requests.

        * public/v2/app.css: Updated style rules for analysis task pages.

        * public/v2/app.js:
        (App.Pane): This class is now used in analysis task pages to make the main chart interactive.
        (App.Pane._updateDetails): Moved from App.PaneController.

        (App.PaneController._updateCanAnalyze): Updated the code per the move of selectedPoints.

        (App.AnalysisTaskController): Added 'details'.
        (App.AnalysisTaskController._taskUpdated):
        (App.AnalysisTaskController.paneDomain):Renamed from _fetchedRuns.
        (App.AnalysisTaskController.updateTestGroupPanes): Added. Creates App.TestGroupPane for each test group.
        (App.AnalysisTaskController.actions.toggleShowRequestList): Added.

        (App.TestGroupPane): Added.
        (App.TestGroupPane._populate): Added. Group build requests by root sets and create a summary for each group.
        (App.TestGroupPane._computeRepositoryList): Added. Returns a sorted list of repositories which is the union
        of all repositories appearing in root sets and builds associated with A/B testing results.
        (App.TestGroupPane._groupRequestsByConfigurations): Added. Groups build requests by root sets.
        (App.TestGroupPane._createConfigurationSummary): Added. Creates a summary for a group of build requests that
        use the same root set. We start by wrapping "raw" build requests in a proxy with formatted values,
        build numbers, etc... obtained from the fetched chart data. The list of revisions shown in the group summary
        is a union of revisions in the root set and the first build request in the group. We null-out revision info
        for a build request if it is identical to the one in the summary. The range of values is expanded as needed
        by the values in the group as well as 95% percentile confidence interval.

        (App.BoxPlotComponent): Added. Controls a box plot shown for each test group summary and build request.
        (App.BoxPlotComponent.didInsertElement): Added. Inserts a SVG element as well as two indicator rects to show
        the mean and the confidence interval.
        (App.BoxPlotComponent._updateBars): Added. Updates the dimensions of the indicator rects.
        (App.BoxPlotComponent.valueChanged): Added. Computes the relative dimensions of the indicator rects and
        calls _updateBars to update the rects.

        * public/v2/chart-pane.css: Added some style rules to be used in the details pane in analysis task pages.

        * public/v2/data.js:
        (Measurement.prototype.formattedRevisions):
        (Measurement.formatRevisionRange): Renamed from Measurement.prototype._formatRevisionRange so that it can be
        called in _createConfigurationSummary.

        * public/v2/index.html: Updated the templates for analysis task pages. Moved the form to create a new test
        group above all test groups, and replaced the list of data points by "details" pane used in the charts page.
        Also made the fetching of chartData no longer block showing of test groups.

        * public/v2/interactive-chart.js:
        (App.InteractiveChartComponent._updateDomain): Added an early exit to fix a newly revealed race condition.
        (App.InteractiveChartComponent._domainChanged): Ditto.
        (App.InteractiveChartComponent._updateSelectionToolbar): Made it respect 'zoomable' boolean property.

        * public/v2/js/statistics.js:
        (Statistics.min): Added.
        (Statistics.max): Added.

        * public/v2/manifest.js:
        (App.Manifest.fetchRunsWithPlatformAndMetric): Added formatWithDeltaAndUnit to be used in _createConfigurationSummary.

2015-02-14  Ryosuke Niwa  <rniwa@webkit.org>

        Build URL on new perf dashboard doesn't resolve $builderName
        https://bugs.webkit.org/show_bug.cgi?id=141583

        Reviewed by Darin Adler.

        Support $builderName in the build URL template.

        * public/js/helper-classes.js:
        (TestBuild.buildUrl): Replaced $builderName with the builder name.

        * public/v2/manifest.js:
        (App.Metric.fullName): Fixed the typo. We need &ni, not &in.
        (App.BuilderurlFromBuildNumber): Replaced $builderName with the builder name.

2015-02-13  Ryosuke Niwa  <rniwa@webkit.org>

        Unreviewed build fix after r179591.

        * public/api/commits.php:

2015-02-13  Ryosuke Niwa  <rniwa@webkit.org>

        The status of a A/B testing request always eventually becomes "Failed"
        https://bugs.webkit.org/show_bug.cgi?id=141523

        Reviewed by Andreas Kling.

        The bug was caused by /api/build-requests always setting the status of a build request to 'failed' when
        'failedIfNotCompleted' was sent by the buildbot sync'er.

        Fixed the bug by only setting the status to 'failed' if it wasn't set to 'completed'.

        * public/api/build-requests.php:
        (main):

2015-02-13  Csaba Osztrogonác  <ossy@webkit.org>

        Unreviewed, remove empty directories.

        * public/data: Removed.

2015-02-12  Ryosuke Niwa  <rniwa@webkit.org>

        Perf dashboard should show the results of A/B testing
        https://bugs.webkit.org/show_bug.cgi?id=141500

        Reviewed by Chris Dumez.

        Added the support for fetching test_runs for a specific test group in /api/runs/, and used it in the
        analysis task page to fetch results for each test group.

        Merged App.createChartData into App.Manifest.fetchRunsWithPlatformAndMetric so that App.BuildRequest
        can use the formatter.

        * public/api/runs.php:
        (fetch_runs_for_config_and_test_group): Added.
        (fetch_runs_for_config): Just return the fetched rows since main will format them with RunsGenerator.
        (main): Use fetch_runs_for_config_and_test_group to fetch rows when a test group id is specified. Also
        use RunsGenerator to format results.
        (RunsGenerator): Added.
        (RunsGenerator::__construct): Added.
        (RunsGenerator::add_runs): Added.
        (RunsGenerator::format_run): Moved.
        (RunsGenerator::parse_revisions_array): Moved.

        * public/v2/analysis.js:
        (App.TestGroup): Fixed a typo. The property on a test group that refers to an analysis task is "task".
        (App.TestGroup._fetchChartData): Added. Fetches all A/B testing results for this group.
        (App.BuildRequest.configLetter): Renamed from config since this returns a letter that identifies the
        configuration associated with this build request such as "A" and "B".
        (App.BuildRequest.statusLabel): Added the missing label for failed build requests.
        (App.BuildRequest.url): Added. Returns the URL associated with this build request.
        (App.BuildRequest._meanFetched): Added. Retrieve the mean and the build number for this request via
        _fetchChartData.

        * public/v2/app.js:
        (App.Pane._fetch): Set chartData directly here.
        (App.Pane._updateMovingAverageAndEnvelope): Renamed from _computeChartData. No longer sets chartData
        now that it's done in App.Pane._fetch.
        (App.AnalysisTaskController._fetchedRuns): Updated per createChartData merge.

        * public/v2/data.js:
        (Measurement.prototype.buildId): Added.
        (TimeSeries.prototype.findPointByBuild): Added.

        * public/v2/index.html: Fixed a bug that build status URL was broken. We can't use link-to helper since
        url is not an Ember routed path.

        * public/v2/manifest.js:
        (App.Manifest.fetchRunsWithPlatformAndMetric): Takes testGroupId as the third argument. Merged
        App.createChartData here so that App.BuildRequest can use the formatter

2015-02-12  Ryosuke Niwa  <rniwa@webkit.org>

        v2 UI should adjust the number of ticks on dashboards based on screen size
        https://bugs.webkit.org/show_bug.cgi?id=141502

        Reviewed by Chris Dumez.

        * public/v2/interactive-chart.js:
        (App.InteractiveChartComponent._updateDimensionsIfNeeded): Compute the number of ticks based on the
        content size.

2015-02-11  Ryosuke Niwa  <rniwa@webkit.org>

        New perf dashboard shows too much space around interesting data points
        https://bugs.webkit.org/show_bug.cgi?id=141487

        Reviewed by Chris Dumez.

        Revise the y-axis range adjustment algorithm in r179913. Instead of showing the entire moving average,
        show the current time series excluding points in the series outside the moving average envelope.

        * public/v2/app.js:
        (App.Pane._computeChartData): Don't deal with missing moving average or enveloping strategy here.
        (App.Pane._computeMovingAverageAndOutliers): Set isOutliner to true on all data points in the current
        time series if the point lies outside the moving average envelope. Don't expose the moving average or
        the envelope computed for this purpose if they're not set by the user.

        * public/v2/data.js:
        (TimeSeries.prototype.minMaxForTimeRange): Takes a boolean argument, ignoreOutlier. When the flag is set
        to true, min/max computation will ignore any point in the series with non-falsy "isOutliner" property.

        * public/v2/interactive-chart.js:
        (App.InteractiveChartComponent._constructGraphIfPossible): Unsupport hideMovingAverage and hideEnvelope.
        (App.InteractiveChartComponent._computeYAxisDomain): Removed the commented out code. Also moved the code
        to deal with showFullYAxis here.
        (App.InteractiveChartComponent._minMaxForAllTimeSeries): Rewrote the code. Takes ignoreOutliners as an
        argument instead of directly inspecting showFullYAxis.

2015-02-10  Ryosuke Niwa  <rniwa@webkit.org>

        New perf dashboard shouldn't always show outliners
        https://bugs.webkit.org/show_bug.cgi?id=141445

        Reviewed by Chris Dumez.

        Use the simple moving average with an average difference envelope to compute the y-axis range to show
        to avoid expanding it spuriously to show one off outlier.

        * public/v2/app.js:
        (App.Pane): Don't show the full y-axis range by default.
        (App.Pane._computeChartData): Use the first strategies for the moving average and the enveloping if
        one is not specified by the user but without showing them in the charts.
        (App.Pane._computeMovingAverage): Takes moving average and enveloping strategies as arguments instead
        of retrieving via chosenMovingAverageStrategy and chosenEnvelopingStrategy.

        (App.ChartsController._parsePaneList): Added showFullYAxis as a query string argument to each pane.
        (App.ChartsController._serializePaneList): Ditto.

        * public/v2/chart-pane.css: Added a CSS rule for when y-axis is clickable.

        * public/v2/index.html: Pass in showFullYAxis as an argument to the main interactive chart.

        * public/v2/interactive-chart.js:
        (App.InteractiveChartComponent._constructGraphIfPossible): Add an event listener on y-axis labels when
        the chart is interactive so that toggle showFullYAxis. Also hide the moving average and/or the envelope
        if they are not specified by the user (i.e. only used to adjust y-axis range).
        (App.InteractiveChartComponent._updateDomain): Don't exit early if y-axis domains are different even if
        x-axis domain remained the same. Without this change, the charts would never redraw.
        (App.InteractiveChartComponent._minMaxForAllTimeSeries): Use the moving average instead of the current
        time series to compute the y-axis range if showFullYAxis is false. When showFullYAxis is true, expand
        y-axis all the way down to 0 or the minimum value in the current time series whichever is smaller.

        * public/v2/js/statistics.js:
        (Statistics.MovingAverageStrategies): Use a wider window in Simple Moving Average by default.

2015-02-10  Ryosuke Niwa  <rniwa@webkit.org>

        Unreviewed build fix.

        * public/v2/app.js:
        (set get App.Pane.Ember.Object.extend):

2015-02-10  Ryosuke Niwa  <rniwa@webkit.org>

        New perf dashboard should have the ability to overlay moving average with an envelope
        https://bugs.webkit.org/show_bug.cgi?id=141438

        Reviewed by Andreas Kling.

        This patch adds three kinds of moving average strategies and two kinds of enveloping strategies:

        Simple Moving Average - The moving average x̄_i of x_i is computed as the arithmetic mean of values
        from x_(i - n) though x_(i + m) where n is a non-negative integer and m is a positive integer. It takes
        n, backward window size, and m, forward window size, as an argument.

        Cumulative Moving Average - x̄_i is computed as the arithmetic mean of all values x_0 though x_i.
        That is, x̄_1 = x_1 and x̄_i = ((i - 1) * M_(i - 1) + x_i) / i for all i > 1.

        Exponential Moving Average - x̄_i is computed as the weighted average of x_i and x̄_(i - 1) with α as
        an argument specifying x_i's weight. To be precise, x̄_1 = x_1 and x̄_i = α * x_i + (α - 1) x̄_(i-1).


        Average Difference - The enveloping delta d is computed as the arithmetic mean of the difference
        between each x_i and x̄_i.

        Moving Average Standard Deviation - d is computed like the standard deviation except the deviation
        for each term is measured from the moving average instead of the sample arithmetic mean. i.e. it uses
        the average of (x_i - x̄_i)^2 as the "sample variance" instead of the conventional (x_i - x̄)^2 where
        x̄ is the sample mean of all x_i's. This change was necessary since our time series is non-stationary.


        Each strategy is cloned for an App.Pane instance so that its parameterList can be configured per pane.
        The configuration of the currently chosen strategies is saved in the query string for convenience.

        Also added the "stat pane" to choose a moving average strategy and a enveloping strategy in each pane.

        * public/v2/app.css: Specify the fill color for all SVG groups in the pane toolbar icons.

        * public/v2/app.js:
        (App.Pane._fetch): Delegate the creation of 'chartData' to _computeChartData.
        (App.Pane.updateStatisticsTools): Added. Clones moving average and enveloping strategies for this pane.
        (App.Pane._cloneStrategy): Added. Clones a strategy for a new pane.
        (App.Pane._configureStrategy): Added. Finds and configures a strategy from the configuration retrieved
        from the query string via ChartsController.
        (App.Pane._computeChartData): Added. Creates chartData from fetchedData.
        (App.Pane._computeMovingAverage): Added. Computes the moving average and the envelope.
        (App.Pane._executeStrategy): Added.
        (App.Pane._updateStrategyConfigIfNeeded): Pushes the strategy configurations to the query string via
        ChartsController.
        (App.ChartsController._parsePaneList): Merged the query string arguments for the range and point
        selections, and added two new arguments for the moving average and the enveloping configurations.
        (App.ChartsController._serializePaneList): Ditto.
        (App.ChartsController._scheduleQueryStringUpdate): Observes strategy configurations.
        (App.PaneController.actions.toggleBugsPane): Hides the stat pane.
        (App.PaneController.actions.toggleSearchPane): Hides the stat pane.
        (App.PaneController.actions.toggleStatPane): Added.

        * public/v2/chart-pane.css: Added CSS rules for the new stat pane. Also added .foreground class for the
        current (as opposed to baseline and target) time series for when it's the most foreground graph without
        moving average and its envelope overlapping on top of it.

        * public/v2/index.html: Added the templates for the stat pane and the corresponding icon (Σ).

        * public/v2/interactive-chart.js:
        (App.InteractiveChartComponent.chartDataDidChange): Unset _totalWidth and _totalHeight to avoid exiting
        early inside _updateDimensionsIfNeeded when chartData changes after the initial layout.
        (App.InteractiveChartComponent.didInsertElement): Attach event listeners here instead of inside
        _constructGraphIfPossible since that could be called multiple times on the same SVG element.
        (App.InteractiveChartComponent._constructGraphIfPossible): Clear down the old SVG element we created
        but don't bother removing individual paths and circles. Added the code to show the moving average time
        series when there is one. Also add "foreground" class on SVG elements for the current time series when
        we're not showing the moving average. chart-pane.css has been updated to "dim down" the current time
        series when "foreground" is not set.
        (App.InteractiveChartComponent._minMaxForAllTimeSeries): Take the moving average time series into
        account when computing the y-axis range.
        (App.InteractiveChartComponent._brushChanged): Removed 'selectionIsLocked' argument as it's useless.

        * public/v2/js/statistics.js:
        (Statistics.MovingAverageStrategies): Added.
        (Statistics.EnvelopingStrategies): Added.

2015-02-06  Ryosuke Niwa  <rniwa@webkit.org>

        The delta value in the chart pane sometimes doens't show '+' for a positive delta
        https://bugs.webkit.org/show_bug.cgi?id=141340

        Reviewed by Andreas Kling.

        The bug was caused by computeStatus prefixing the value delta with '+' if it's greater than 0 after
        it had already been formatted. Fixed the bug by using a formatter that always emits a sign symbol.

        * public/v2/app.js:
        (App.Pane.computeStatus):
        (App.createChartData):

2015-02-06  Ryosuke Niwa  <rniwa@webkit.org>

        Unreviewed build fix. currentPoint wasn't defined when selectedPoints was used to find points.

        * public/v2/app.js:
        (App.PaneController._updateDetails):

2015-02-06  Ryosuke Niwa  <rniwa@webkit.org>

        Unreviewed. Commit the forgotten change.

        * public/include/manifest.php:

2015-02-06  Ryosuke Niwa  <rniwa@webkit.org>

        New perf dashboard should have multiple dashboard pages
        https://bugs.webkit.org/show_bug.cgi?id=141339

        Reviewed by Chris Dumez.

        Added the support for multiple dashboard pages. Also added the status of the latest data point.
        e.g. "5% better than target"

        * public/v2/app.css: Tweaked the styles to work around the fact Ember.js creates empty script elements.
        Also hid the border lines around charts on the dashboard page for a cleaner look.

        * public/v2/app.js:
        (App.IndexRoute): Added. Navigate to /dashboard/<defaultDashboardName> once the manifest.json is loaded.
        (App.IndexRoute.beforeModel): Added.
        (App.DashboardRoute): Added.
        (App.DashboardRoute.model): Added. Return the dashboard specified by the name.
        (App.CustomDashboardRoute): Added. This route is used for a customized dashboard specified by "grid".
        (App.CustomDashboardRoute.model): Create a dashboard model from "grid" query parameter.
        (App.CustomDashboardRoute.renderTemplate): Use the dashboard template.
        (App.DashboardController): Renamed from App.IndexController.
        (App.DashboardController.modelChanged): Renamed from gridChanged. Removed the code to deal with "grid"
        and "defaultDashboard" as these are taken care of by newly added routers.
        (App.DashboardController.computeGrid): Renamed from updateGrid. No longer updates "grid" since this is
        now done in actions.toggleEditMode.
        (App.DashboardController.actions.toggleEditMode): Navigate to CustomDashboardRoute when start editing
        an existing dashboard.

        (App.Pane.computeStatus): Moved from App.PaneController so that to be called in App.Pane.latestStatus.
        Also moved the code to compute the delta with respect to the previous data point from _updateDetails.
        (App.Pane._relativeDifferentToLaterPointInTimeSeries): Ditto.
        (App.Pane.latestStatus): Added. Used by the dashboard template to show the status of the latest result.

        (App.createChartData): Added deltaFormatter to show less significant digits for differences.

        (App.PaneController._updateDetails): Updated per changes to computeStatus.

        * public/v2/chart-pane.css: Added style rules for the status labels on the dashboard.

        * public/v2/data.js:
        (TimeSeries.prototype.lastPoint): Added.

        * public/v2/index.html: Prefetch manifest.json as soon as possible, show the latest data points' status
        on the dashboard, and enumerate all predefined dashboards.

        * public/v2/interactive-chart.js:
        (App.InteractiveChartComponent._relayoutDataAndAxes): Slightly adjust the offset at which we show unit
        for the dashboard page.

        * public/v2/manifest.js:
        (App.Dashboard): Inherit from App.NameLabelModel now that each predefined dashboard has a name.
        (App.MetricSerializer.normalizePayload): Parse all predefined dashboards instead of a single dashboard.
        IDs are generated for each dashboard for forward compatibility.
        (App.Manifest):
        (App.Manifest.dashboardByName): Added.
        (App.Manifest.defaultDashboardName): Added.
        (App.Manifest._fetchedManifest): Create dashboard model objects for all predefined ones.

2015-02-05  Ryosuke Niwa  <rniwa@webkit.org>

        Move commits viewer to the end of details view
        https://bugs.webkit.org/show_bug.cgi?id=141315

        Rubber-stamped by Andreas Kling.

        Show the difference instead of the old value per kling's request.

        * public/v2/app.js:
        (App.PaneController._updateDetails):
        * public/v2/index.html:

2015-02-05  Ryosuke Niwa  <rniwa@webkit.org>

        Move commits viewer to the end of details view
        https://bugs.webkit.org/show_bug.cgi?id=141315

        Reviewed by Andreas Kling.

        Improved the way list of commits are shown per kling's request.

        * public/v2/app.js:
        (App.PaneController._updateDetails): Always show the old value even when a single point is selected.

        * public/v2/chart-pane.css: Updated the style for the commits viewer.

        * public/v2/commits-viewer.js:
        (App.CommitsViewerComponent): Added "visible" property to hide the list of commits.
        (App.CommitsViewerComponent.actions.toggleVisibility): Added. Toggles "visible" property.

        * public/v2/index.html: Updated the template for commits viewer to support "visible" property. Also
        moved the commits viewers out of the details tables so that they don't interleave revision data.

2015-02-05  Ryosuke Niwa  <rniwa@webkit.org>

        New perf dashboard should compare results to baseline and target
        https://bugs.webkit.org/show_bug.cgi?id=141286

        Reviewed by Chris Dumez.

        Compare the selected value against baseline and target values as done in v1. e.g. "5% below target"
        Also use d3.format to format the selected value to show four significant figures.

        * public/v2/app.js:
        (App.Pane.searchCommit):
        (App.Pane._fetch): Create time series here via createChartData so that _computeStatus can use them
        to compute the status text without having to recreate them.
        (App.createChartData): Added.
        (App.PaneController._updateDetails): Use 3d.format on current and old values.
        (App.PaneController._computeStatus): Added. Computes the status text.
        (App.PaneController._relativeDifferentToLaterPointInTimeSeries): Added.
        (App.AnalysisTaskController._fetchedManifest): Use createChartData as done in App.Pane._fetch. Also
        format the values using chartData.formatter.

        * public/v2/chart-pane.css: Enlarge the status text. Show the status text in red if it's worse than
        the baseline and in blue if it's better than the target.

        * public/v2/data.js:
        (TimeSeries.prototype.findPointAfterTime): Added.

        * public/v2/index.html: Added a new tbody for the status text and the selected value. Also fixed
        the bug that we were not showing the old value's unit.

        * public/v2/interactive-chart.js:
        (App.InteractiveChartComponent._constructGraphIfPossible): Use chartData.formatter. Also cleaned up
        the code to show the baseline and the target lines.

        * public/v2/manifest.js:
        (App.Manifest.fetchRunsWithPlatformAndMetric): Added smallerIsBetter.

2015-02-05  Ryosuke Niwa  <rniwa@webkit.org>

        Unreviewed build fix.

        * public/v2/app.js:
        (App.IndexController.gridChanged): Use store.createRecord to create a custom dashboard as required by Ember.js

2015-02-04  Ryosuke Niwa  <rniwa@webkit.org>

        New perf dashboard doesn't preserve the number of days when clicking on a dashboard chart
        https://bugs.webkit.org/show_bug.cgi?id=141280

        Reviewed by Chris Dumez.

        Fixed the bug by passing in "since" as a query parameter to the charts page.

        Also fixed the styling issue that manifests when a JSON fetching fails on "Dashboard" page.

        * public/v2/app.css: Fixed CSS rules for error messages shown in the place of charts.
        * public/v2/app.js:
        (App.IndexController): Changed the default number of days from one month to one week.
        (App.IndexController._sharedDomainChanged): Set "since" property on the controller.
        * public/v2/index.html: Pass in "since" property on the controller as a query parameter.

2015-02-04  Ryosuke Niwa  <rniwa@webkit.org>

        New perf dashboard erroneously clears zoom when poping history items
        https://bugs.webkit.org/show_bug.cgi?id=141278

        Reviewed by Chris Dumez.

        The bug was caused by _sharedZoomChanged updating overviewSelection without updating mainPlotDomain.

        Updating overviewSelection resulted in _overviewSelectionChanged, which observes changes to overviewSelection,
        to schedule a call to propagateZoom, which in turn overrode "sharedZoom" we just parsed from the query string.

        * public/v2/app.js:
        (App.PaneController._overviewSelectionChanged): Don't schedule propagateZoom if the selected domain is already
        shown in the main plot.
        (App.PaneController._sharedZoomChanged): Set both overviewSelection and mainPlotDomain to avoid overriding
        "sharedZoom" via propagateZoom inside _overviewSelectionChanged.

2015-02-04  Ryosuke Niwa  <rniwa@webkit.org>

        New perf dashboard shows null as the aggregator name if no aggregation is done
        https://bugs.webkit.org/show_bug.cgi?id=141256

        Reviewed by Chris Dumez.

        Don't show the aggregator name if there isn't one.

        * public/v2/manifest.js:
        (App.Metric.label):

2015-02-04  Ryosuke Niwa  <rniwa@webkit.org>

        Unreviewed build fix after r179611.

        * public/v2/interactive-chart.js:

2015-02-04  Ryosuke Niwa  <rniwa@webkit.org>

        Perf dashboard doesn’t show the right unit for Safari UI tests
        https://bugs.webkit.org/show_bug.cgi?id=141238

        Reviewed by Darin Adler.

        Safari UI tests use custom metrics that end with "Time". This patch teaches the perf dashboard how to
        get the unit for a given metric based on the suffix of the metric name instead of hard-coding the mapping
        between metrics and their units.

        * public/js/helper-classes.js:
        (PerfTestRuns): Use the suffix of the metric name to compute the unit.
        * public/v2/manifest.js:
        (App.Manifest.fetchRunsWithPlatformAndMetric): Ditto. Also set "useSI" property iff for "bytes".
        * public/v2/interactive-chart.js:
        (App.InteractiveChartComponent._constructGraphIfPossible): Respect useSI. Use toPrecision(3) otherwise.
        (App.InteractiveChartComponent._relayoutDataAndAxes): Place the unit vertically on the left of ticks.

2015-02-04  Ryosuke Niwa  <rniwa@webkit.org>

        Interactive chart component provides two duplicate API for highlighting points
        https://bugs.webkit.org/show_bug.cgi?id=141234

        Reviewed by Chris Dumez.

        Prior to this patch, the interactive chart component supported highlightedItems for finding commits
        on the main charts page and markedPoints to show the two end points in the analysis task page.

        This patch merges markedPoints into highlightedItems. 

        * public/v2/app.js:
        (App.AnalysisTaskController._fetchedRuns): Use highlightedItems.
        * public/v2/chart-pane.css:
        * public/v2/index.html: Ditto.
        * public/v2/interactive-chart.js: 
        (App.InteractiveChartComponent._constructGraphIfPossible): Make this._highlights an array instead of
        array of arrays. Also call _highlightedItemsChanged at the end to fix the bug that we never highlight
        items if highlightedItems was set before the initial layout.
        (App.InteractiveChartComponent._relayoutDataAndAxes):
        (App.InteractiveChartComponent._updateHighlightPositions): Now that highlights are circles instead of
        vertical lines, just set cx and cy as done for other "dots".
        (App.InteractiveChartComponent._highlightedItemsChanged): Exit early only if _clippedContainer wasn't
        already set; i.e. _constructGraphIfPossible hasn't been called. Also updated the logic to accommodate
        the fact this._highlights is an array of elements instead of an array of arrays of elements. Finally,
        set the radius of highlight circles here.

2015-02-03  Ryosuke Niwa  <rniwa@webkit.org>

        Don’t use repository names as id’s.
        https://bugs.webkit.org/show_bug.cgi?id=141226

        Reviewed by Chris Dumez.

        Not using repository names as their id's reduces the need to fetch the entire repositories table.
        Since names of repositories are available in manifest.json, we can resolve their names in the front end.

        * Websites/perf.webkit.org/public/api/runs.php:
        (parse_revisions_array): No longer uses $repository_id_to_name.
        (main): No longer populates $repository_id_to_name.

        * Websites/perf.webkit.org/public/api/triggerables.php:
        (main): Don't resolve repository names.

        * Websites/perf.webkit.org/public/include/manifest.php:
        (ManifestGenerator::repositories): Use repositories ids as keys in the result and include their names.
        (ManifestGenerator::bug_trackers): Don't resolve repository names.

        * Websites/perf.webkit.org/public/js/helper-classes.js:
        (TestBuild): Renamed repositoryName to repositoryId.
        (TestBuild.revision): Ditto.
        (TestBuild.formattedRevisions): Ditto. Continue to use the repository name in the formatted result
        since this is the text shown to human.

        * Websites/perf.webkit.org/public/v2/app.js:
        (App.pane.searchCommit): Renamed repositoryName to repositoryId.
        (App.PaneController._updateDetails): Ditto.
        (App.AnalysisTaskController.updateRoots): Ditto.

        * Websites/perf.webkit.org/public/v2/data.js:
        (Measurement): Ditto.
        (Measurement.prototype.commitTimeForRepository): Ditto.
        (Measurement.prototype.formattedRevisions): Ditto.

        * Websites/perf.webkit.org/public/v2/index.html: Use the repository name and the repository id as
        select element's label and value respectively.

2015-02-03  Ryosuke Niwa  <rniwa@webkit.org>

        Unreviewed build fix. Declare $repository_id_to_name in the global scope.

        * public/api/runs.php:

2015-02-03  Ryosuke Niwa  <rniwa@webkit.org>

        /api/runs.php should have main function
        https://bugs.webkit.org/show_bug.cgi?id=141220

        Reviewed by Benjamin Poulain.

        Wrapped the code inside main function for clarity.

        * public/api/runs.php:

2015-01-27  Ryosuke Niwa  <rniwa@webkit.org>

        Unreviewed build fix. "eta" isn't set on a in-progress build on a newly added builder.

        * tools/sync-with-buildbot.py:
        (find_request_updates):

2015-01-23  Ryosuke Niwa  <rniwa@webkit.org>

        Perf dashboard always assigns the result of A/B testing with build request 1
        https://bugs.webkit.org/show_bug.cgi?id=140382

        Reviewed by Darin Adler.

        The bug was caused by the expression array_get($report, 'jobId') or array_get($report, 'buildRequest')
        which always evaluated to 1 when the report contained jobId. Fixed the bug by cascading array_get instead.

        Also fixed a typo as well as a bug that reports were never associated with builds.

        * public/include/report-processor.php:
        (ReportProcessor::process): Don't use "or" to find the non-null value since that always evaluates to 1
        instead of the first non-null value.
        (ReportProcessor::resolve_build_id): Fixed the typo by adding the missing "$this->".
        (ReportProcessor::commit): Associate the report with the corresponding build as intended.

2015-01-23  Ryosuke Niwa  <rniwa@webkit.org>

        Unreviewed typo fix. The prefix in triggerable_configurations is "trigconfig", not "trigrepo".

        * public/admin/tests.php:

2015-01-10  Ryosuke Niwa  <rniwa@webkit.org>

        Unreviewed build fix. Removed the stale code.

        * public/admin/triggerables.php:

2015-01-09  Ryosuke Niwa  <rniwa@webkit.org>

        Perf dashboard should have the ability to post A/B testing builds
        https://bugs.webkit.org/show_bug.cgi?id=140317

        Rubber-stamped by Simon Fraser.

        This patch adds the support for triggering A/B testing from the perf dashboard.

        We add a few new tables to the database. "build_triggerables", which represents a set of builders
        that accept A/B testing. "triggerable_repositories" associates each "triggerable" with a fixed set
        of repositories for which an arbitrary revision can be specified for A/B testing.
        "triggerable_configurations" specifies a triggerable available on a given test on a given platform.
        "roots" table which specifies the revision used in a given root set in each repository.

        * init-database.sql: Added "build_triggerables", "triggerable_repositories",
        "triggerable_configurations", and "roots" tables. Added references to "build_triggerables",
        "platforms", and "tests" tables as well as columns to store status, status url, and creation time
        to build_requests table. Also made each test group's name unique in a given analysis task as it
        would be confusing to have multiple test groups of the same name.

        * public/admin/tests.php: Added the UI and the code to associate a test with a triggerable.

        * public/admin/triggerables.php: Added. Manages the list of triggerables as well as repositories
        for which a specific revision can be set in an A/B testing on a given triggerable.

        * public/api/build-requests.php: Added. Returns the list of open build requests on a specified
        triggerable. Also updates the status' and the status urls of specified build requests when
        buildRequestUpdates is provided in the raw POST data.
        (main):

        * public/api/runs.php:
        (fetch_runs_for_config): Don't include results associated with a build request, meaning they are
        results of an A/B testing.

        * public/api/test-groups.php:
        (main): Use the newly added BuildRequestsFetcher. Also merged fetch_test_groups_for_task back.

        * public/api/triggerables.php: Added.
        (main): Returns a list of triggerables or a triggerable associated with a given analysis task.

        * public/include/admin-header.php:

        * public/include/build-requests-fetcher.php: Added. Extracted from public/api/test-groups.php.
        (BuildRequestsFetcher): This class abstracts the process of fetching a list of builds requests
        and root sets used in those requests.D
        (BuildRequestsFetcher::__construct):
        (BuildRequestsFetcher::fetch_for_task):
        (BuildRequestsFetcher::fetch_for_group):
        (BuildRequestsFetcher::fetch_incomplete_requests_for_triggerable):
        (BuildRequestsFetcher::has_results):
        (BuildRequestsFetcher::results):
        (BuildRequestsFetcher::results_with_resolved_ids):
        (BuildRequestsFetcher::results_internal):
        (BuildRequestsFetcher::root_sets):
        (BuildRequestsFetcher::fetch_roots_for_set):

        * public/include/db.php:
        (Database::prefixed_column_names): Don't return "$prefix_" when there are no columns.
        (Database::insert_row): Support taking an empty array for values. This is useful in "root_sets"
        table since it only has the primary key, id, column.
        (Database::select_or_insert_row):
        (Database::update_or_insert_row):
        (Database::update_row): Added.
        (Database::_select_update_or_insert_row): Takes an extra argument specifying whether a new row
        should be inserted when no row matches the specified criteria. This is used while updating
        build_requests' status and url in public/api/build-requests.php since we shouldn't be inserting
        new build requests in that API.
        (Database::select_rows): Also use "1 == 1" in the select query when the query criteria is empty.
        This is used in public/api/triggerables.php when no analysis task is specified.

        * public/include/json-header.php:
        (find_triggerable_for_task): Added. Finds a triggerable available on a given test. We return the
        triggerable associated with the closest ancestor of the test. Since issuing a new query for each
        ancestor test is expensive, we retrieve triggerable for all ancestor tests at once and manually
        find the closest ancestor with a triggerable.

        * public/include/report-processor.php:
        (ReportProcessor::process):
        (ReportProcessor::resolve_build_id): Associate a build request with the newly created build
        if jobId or buildRequest is specified.

        * public/include/test-name-resolver.php:
        (TestNameResolver::map_metrics_to_tests): Store the entire metric row instead of its name so that
        test_exists_on_platform can use it. The last diff in public/admin/tests.php adopts this change.
        (TestNameResolver::test_exists_on_platform): Added. Returns true iff the test has ever run on
        a given platform.

        * public/include/test-path-resolver.php: Added.
        (TestPathResolver): This class abstracts the ancestor chains of a test. It retrieves the entire
        "tests" table to do this since there could be arbitrary number of ancestors for a given test.
        This class is a lot more lightweight than TestNameResolver, which retrieves a whole bunch of tables
        in order to compute full test metric names.
        (TestPathResolver::__construct):
        (TestPathResolver::ancestors_for_test): Returns the ordered list of ancestors from the closest to
        the highest (a test without a parent).
        (TestPathResolver::path_for_test): Returns a test "path", the ordered list of test names from
        the highest ancestor to the test itself.
        (TestPathResolver::ensure_id_to_test_map): Fetches "tests" table to construct id_to_test_map.

        * public/privileged-api/create-test-group.php: Added. An API to create A/B testing groups.
        (main):
        (commit_sets_from_root_sets): Given a dictionary of repository names to a pair of revisions
        for sets A and B respectively, returns a pair of arrays, each of which contains the corresponding
        set of "commits" for sets A and B respectively. e.g. {"WebKit": [1, 2], "Safari": [3, 4]} will
        result in [[WebKit commit at r1, Safari commit at r3], [WebKit commit at r2, Safari commit at r4]].

        * public/v2/analysis.js:
        (App.AnalysisTask.testGroups): Takes arguments so that set('testGroups') will invalidate the cache.
        (App.AnalysisTask.triggerable): Added. Retrieves the triggerable associated with the task lazily.
        (App.TestGroup.rootSets): Added. Returns the list of root set ids used in this A/B testing group.
        (App.TestGroup.create): Added. Creates a new A/B testing group.
        (App.Triggerable): Added.
        (App.TriggerableAdapter): Added.
        (App.TriggerableAdapter.buildURL): Added.
        (App.BuildRequest.testGroup): Renamed from group.
        (App.BuildRequest.orderLabel): Added. One-based index to be used in labels.
        (App.BuildRequest.config): Added. Returns either 'A' or 'B' depending on the configuration used
        in this build request.
        (App.BuildRequest.status): Added.
        (App.BuildRequest.statusLabel): Added. Returns a human friendly label for the current status.
        (App.BuildRequest): Removed buildNumber, buildBuilder, as well as buildTime as they're unused.

        * public/v2/app.js:
        (App.AnalysisTaskController.testGroups): Added.
        (App.AnalysisTaskController.possibleRepetitionCounts): Added.
        (App.AnalysisTaskController.updateRoots): Renamed from roots. This is also no longer a property
        but an observer that updates "roots" property. Filter out the repositories that are not accepted
        by the associated triggerable as they will be ignored.
        (App.AnalysisTaskController.actions.createTestGroup): Added.

        * public/v2/index.html: Updated the UI, and added a form element to trigger createTestGroup action.

        * tools/sync-with-buildbot.py: Added. This scripts posts new builds on buildbot and reports back
        the status of those builds to the perf dashboard. A similar script can be written to support
        other continuous builds systems.
        (main): Fetches the list of pending builds as well as currently running or completed builds from
        a buildbot, and report new statuses of builds requests to the perf dashboard. It will then schedule
        a single new build on each builder with no pending builds, and marks the set of open build requests
        that have been scheduled to run on the buildbot but not found in the first step as stale.
        (load_config): Loads a JSON that contains the configurations for each builder. e.g.
        [
            {
                "platform": "mac-mavericks",
                "test": ["Parser", "html5-full-render.html"],
                "builder": "Trunk Syrah Production Perf AB Tests",
                "arguments": {
                    "forcescheduler": "force-mac-mavericks-release-perf",
                    "webkit_revision": "$WebKit",
                    "jobid": "$buildRequest"
                }
            }
        ]

        (find_request_updates): Return a list of build request status updates to make based on the pending
        builds as well as in-progress and completed builds on each builder on the buildbot. When a build is
        completed, we use the special status "failedIfNotCompleted" which results in "failed" status only
        if the build request had not been completed. This is necessary because a failed build will not
        report its failed-ness back to the perf dashboard in some cases; e.g. lost slave or svn up failure.
        (update_and_fetch_build_requests): Submit the build request status updates and retrieve the list
        of open requests the perf dashboard has.
        (find_stale_request_updates): Compute the list of build requests that have been scheduled on the
        buildbot but not found in find_request_updates. These build requests are lost. e.g. a master reboot
        or human canceling a build may trigger such a state.
        (schedule_request): Schedules a build with the arguments specified in the configuration JSON after
        replacing repository names with their revisions and buildRequest with the build request id.
        (config_for_request): Finds a builder for the test and the platform of a build request.
        (fetch_json): Fetches a JSON from the specified URL, optionally with BasicAuth.
        (property_value_from_build): Returns the value of a specific property in a buildbot build.
        (request_id_from_build): Returns the build request id of a given buildbot build if there is one.

2015-01-09  Ryosuke Niwa  <rniwa@webkit.org>

        Cache-control should be set only on api/runs
        https://bugs.webkit.org/show_bug.cgi?id=140312

        Reviewed by Andreas Kling.

        Some JSON APIs such as api/analysis-tasks can't be cached even for a short period of time (e.g. a few minutes)
        since they can be modified by the user on demand. Since only api/runs.php takes a long time to generate JSONs,
        just set cache-control there instead of json-header.php which is used by other JSON APIs.

        Also set date_default_timezone_set in db.php since we never use non-UTC timezone in our scripts.

        * public/api/analysis-tasks.php:
        * public/api/runs.php: Set the cache control headers.
        * public/api/test-groups.php:
        * public/include/db.php: Set the default timezone to UTC.
        * public/include/json-header.php: Don't set the cache control headers.

2015-01-09  Ryosuke Niwa  <rniwa@webkit.org>

        api/report-commit should authenticate with a slave name and password
        https://bugs.webkit.org/show_bug.cgi?id=140308

        Reviewed by Benjamin Poulain.

        Use a slave name and a password to authenticate new commit reports.

        * public/api/report-commits.php:
        (main):
        * public/include/json-header.php:
        (verify_slave): Renamed and repurposed from verify_builder in report-commits.php. Now authenticates with
        a slave name and a password instead of a builder name and a password.
        * tests/api-report-commits.js: Updated tests.
        * tools/pull-svn.py:
        (main): Renamed variables.
        (submit_commits): Submits slaveName and slavePassword instead of builderName and builderPassword.

2014-12-19  Ryosuke Niwa  <rniwa@webkit.org>

        Perf dashboard should support authentication via a slave password
        https://bugs.webkit.org/show_bug.cgi?id=139837

        Reviewed by Andreas Kling.

        For historical reasons, perf dashboard conflated builders and build slaves. As a result we ended up
        having to add multiple builders with the same password when a single build slave is shared among them.

        This patch introduces the concept of build_slave into the perf dashboard to end this madness.

        * init-database.sql: Added build_slave table as well as references to it in builds and reports.

        * public/admin/build-slaves.php: Added.

        * public/admin/builders.php: Added the support for updating passwords.

        * public/include/admin-header.php:
        (update_field): Takes an extra argument when a new value needs to be supplied by the caller instead of
        being retrieved from $_POST.
        (AdministrativePage::render_table): Use array_get to retrieve a value out of the database row since
        the raw may not exist (e.g. new_password).
        (AdministrativePage::render_form_to_add): Added the support for post_insertion. Don't render the form
        control here when this flag evaluates to TRUE.

        * public/include/report-processor.php:
        (ReportProcessor::process): Added the logic to authenticate with slaveName and slavePassword if those
        values are present in the report. In addition, try authenticating builderName with slavePassword if
        builderPassword is not specified. When neither password is specified, exit with BuilderNotFound.
        Also insert the slave or the builder whichever is missing after we've successfully authenticated.
        (ReportProcessor::construct_build_data): Takes a builder ID and an optional slave ID instead of
        a builder row.
        (ReportProcessor::store_report): Store the slave ID with the report.
        (ReportProcessor::resolve_build_id): Exit with MismatchingBuildSlave when the slave associated with
        the matching build is different from what's being reported.

        * tests/api-report.js: Added a bunch of tests to test the new features of /api/report.
        (.addSlave): Added.

2014-12-18  Ryosuke Niwa  <rniwa@webkit.org>

        New perf dashboard should not duplicate author information in each commit
        https://bugs.webkit.org/show_bug.cgi?id=139756

        Reviewed by Darin Adler.

        Instead of each commit having author name and email, make it reference a newly added committers table.
        Also replace "email" by "account" since some repositories don't use emails as account names.

        This improves the keyword search performance in commits.php since LIKE now runs on committers table,
        which only contains as many rows as there are accounts in each repository, instead of commits table
        which contains every commit ever happened in each repository.

        To migrate an existing database into match the new schema, run:

        BEGIN;

        INSERT INTO committers (committer_repository, committer_name, committer_email)
            (SELECT DISTINCT commit_repository, commit_author_name, commit_author_email
                FROM commits WHERE commit_author_email IS NOT NULL);

        ALTER TABLE commits ADD COLUMN commit_committer integer REFERENCES committers ON DELETE CASCADE;

        UPDATE commits SET commit_committer = committer_id FROM committers
            WHERE commit_repository = committer_repository AND commit_author_email = committer_email;

        ALTER TABLE commits DROP COLUMN commit_author_name CASCADE;
        ALTER TABLE commits DROP COLUMN commit_author_email CASCADE;

        COMMIT;

        * init-database.sql: Added committers table, and replaced author columns in commits table by a foreign
        reference to committers. Also added the missing drop table statements.

        * public/api/commits.php:
        (main): Fetch the corresponding committers row for a single commit. Also wrap a single commit by
        an array here instead of doing it in format_commit.
        (fetch_commits_between): Updated queries to JOIN commits with committers.
        (format_commit): Takes both commit and committers rows. Also don't wrap the result in an array as that
        is now done in main.

        * public/api/report-commits.php:
        (main): Store the reported committer information or update the existing entry if there is one.

        * tests/admin-regenerate-manifest.js: Fixed tests.

        * tests/api-report-commits.js: Ditto. Also added a test for updating an existing committer entry.

        * tools/pull-svn.py: Renamed email to account.
        (main):
        (fetch_commit_and_resolve_author):
        (fetch_commit):
        (resolve_author_name_from_account):
        (resolve_author_name_from_email): Deleted.

2014-12-17  Ryosuke Niwa  <rniwa@webkit.org>

        Unreviewed build fix.

        * public/v2/index.html: Include js files we extracted in r177424.

2014-12-16  Ryosuke Niwa  <rniwa@webkit.org>

        Unreviewed. Adding the forgotten svnprop.

        * tools/pull-svn.py: Added property svn:executable.

2014-12-16  Ryosuke Niwa  <rniwa@webkit.org>

        Split InteractiveChartComponent and CommitsViewerComponent into separate files
        https://bugs.webkit.org/show_bug.cgi?id=139716

        Rubber-stamped by Benjamin Poulain.

        Refactored InteractiveChartComponent and CommitsViewerComponent out of app.js into commits-viewer.js
        and interactive-chart.js respectively since app.js has gotten really large.

        * public/v2/app.js:
        * public/v2/commits-viewer.js: Added.
        * public/v2/interactive-chart.js: Added.

2014-12-02  Ryosuke Niwa  <rniwa@webkit.org>

        New perf dashboard's chart UI is buggy
        https://bugs.webkit.org/show_bug.cgi?id=139214

        Reviewed by Chris Dumez.

        The bugginess was caused by weird interactions between charts and panes. Rewrote the code to fix it.

        Superfluous selectionChanged and domainChanged "event" actions were removed from the interactive chart
        component. This is not how Ember.js components should interact to begin with. The component now exposes
        selectedPoints and always updates selection instead of sharedSelection.

        * public/v2/app.js:
        (App.ChartsController.present): Added. We can't call Date.now() in various points in our code as that
        would lead to infinite mutual recursions since X-axis domain values wouldn't match up.
        (App.ChartsController.updateSharedDomain): This function was completely useless. The overview's start
        and end time should be completely determined by "since" and the present time.
        (App.ChartsController._startTimeChanged): Ditto.
        (App.ChartsController._scheduleQueryStringUpdate):
        (App.ChartsController._updateQueryString): Set "zoom" only if it's different from the shared domain.

        (App.domainsAreEqual): Moved from InteractiveChartComponent._xDomainsAreSame.

        (App.PaneController.actions.createAnalysisTask): Use selectedPoints property set by the chart.
        (App.PaneController.actions.overviewDomainChanged): Removed; only needed to call updateSharedDomain.
        (App.PaneController.actions.rangeChanged): Removed. _showDetails (renamed to _updateDetails) directly
        observes the changes to selectedPoints property as it gets updated by the main chart.
        (App.PaneController._overviewSelectionChanged): This was previously a dead code. Now it's used again
        with a bug fix. When the overview selection is cleared, we use the same domain in the main chart and
        the overview chart.
        (App.PaneController._sharedDomainChanged): Fixed a but that it erroneously updates the overview domain
        when domain arrays aren't identical. This was causing a subtle race with other logic.
        (App.PaneController._sharedZoomChanged): Ditto. Also don't set mainPlotDomain here as any changes to
        overviewSelection will automatically propagate to the main plot's domain as they're aliased.
        (App.PaneController._currentItemChanged): Merged into _updateDetails (renamed from _showDetails).
        (App.PaneController._updateDetails): Previously, this function took points and inspected _hasRange to
        see if those two points correspond to a range or a single data point. Rewrote all that logic by
        directly observing selectedPoints and currentItem properties instead of taking points and relying on
        an instance variable, which was a terrible API.
        (App.PaneController._updateCanAnalyze): Use selectedPoints property. Since this property is only set
        when the main plot has a selected range, we don't have to check this._hasRange anymore.

        (App.InteractiveChartComponent._updateDomain): No longer sends domainChanged "event" action.
        (App.InteractiveChartComponent._sharedSelectionChanged): Removed. This is a dead code.
        (App.InteractiveChartComponent._updateSelection):
        (App.InteractiveChartComponent._xDomainsAreSame): Moved to App.domainsAreEqual.
        (App.InteractiveChartComponent._setCurrentSelection): Update the selection only if needed. Also set
        selectedPoints property.

        (App.AnalysisTaskController._fetchedRuns):
        (App.AnalysisTaskController._rootChangedForTestSet):

        * public/v2/index.html:
        Removed non-functional sharedSelection and superfluous selectionChanged and domainChanged actions.

2014-11-21  Ryosuke Niwa  <rniwa@webkit.org>

        Unreviewed. Fixed syntax errors.

        * init-database.sql:
        * public/api/commits.php:

2014-11-21  Ryosuke Niwa  <rniwa@webkit.org>

        The dashboard on new perf monitor should be configurable
        https://bugs.webkit.org/show_bug.cgi?id=138994

        Reviewed by Benjamin Poulain.

        For now, make it configurable via config.json. We should eventually make it configurable via
        an administrative page but this will do for now.

        * config.json: Added the empty dashboard configuration.

        * public/include/manifest.php: Include the dashboard configuration in the manifest file.

        * public/v2/app.js:
        (App.IndexController): Removed defaultTable since this is now dynamically obtained via App.Manifest.
        (App.IndexController.gridChanged): Use App.Dashboard to parse the dashboard configuration.
        Also obtain the default configuration from App.Manifest.
        (App.IndexController._normalizeTable): Moved to App.Dashboard.

        * public/v2/manifest.js:
        (App.Repository.urlForRevision): Fixed the position of the open curly bracket.
        (App.Repository.urlForRevisionRange): Ditto.
        (App.Dashboard): Added.
        (App.Dashboard.table): Extracted from App.IndexController.gridChanged.
        (App.Dashboard.rows): Ditto.
        (App.Dashboard.headerColumns): Ditto.
        (App.Dashboard._normalizeTable): Moved from App.IndexController._normalizeTable.
        (App.MetricSerializer.normalizePayload): Synthesize a dashboard record from the configuration.
        Since there is exactly one dashboard object per app, it's okay to hard code an id here.
        (App.Manifest._fetchedManifest): Set defaultDashboard to the one and only one dashboard we have.

2014-11-21  Ryosuke Niwa  <rniwa@webkit.org>

        There should be a way to associate bugs with analysis tasks
        https://bugs.webkit.org/show_bug.cgi?id=138977

        Reviewed by Benjamin Poulain.

        Updated associate-bug.php to match the new database schema.

        * public/include/json-header.php:
        (require_format): Removed the call to camel_case_words_separated_by_underscore since the name is
        already camel-cased in require_existence_of. This makes the function usable elsewhere.

        * public/privileged-api/associate-bug.php:
        (main): Changed the API to take run, bugTracker, and number to match the new database schema.
        Also verify that those values are integers using require_format.

        * public/v2/analysis.js:
        (App.AnalysisTask.label): Added. Concatenates the task's name with the bug numbers.
        (App.Bug.label): Added.
        (App.BugAdapter): Added.
        (App.BugAdapter.createRecord): Use PrivilegedAPI instead of the builtin ajax call.
        (App.BuildRequest): Inherit from newly added App.Model, which is set to DS.Model right now.

        * public/v2/app.css: Renamed .test-groups to .analysis-group. Also added new rules for the table
        containing the bug information.

        * public/v2/app.js:
        (App.InteractiveChartComponent._rangesChanged): Added label to range bar objects.
        (App.AnalysisTaskRoute):
        (App.AnalysisTaskController): Replaced the functionality of App.AnalysisTaskViewModel.
        (App.AnalysisTaskController._fetchedManifest): Added.
        (App.AnalysisTaskController.actions.associateBug): Added.

        * public/v2/chart-pane.css: Renamed .bugs-pane to .analysis-pane.

        * public/v2/data.js:
        (Measurement.prototype.associateBug): Deleted.

        * public/v2/index.html: Renamed .bugs-pane to .analysis-pane and .test-groups to .analysis-group.
        Added a table show the bug information. Also hide the chart until chartData is available.

        * public/v2/manifest.js:
        (App.Model): Added.

2014-11-20  Ryosuke Niwa  <rniwa@webkit.org>

        Fix misc bugs and typos in app.js
        https://bugs.webkit.org/show_bug.cgi?id=138946

        Reviewed by Benjamin Poulain.

        * public/v2/app.js:
        (App.DashboardPaneProxyForPicker._platformOrMetricIdChanged):
        (App.ChartsController.init):
        (App.buildPopup): Renamed from App.BuildPopup.
        (App.InteractiveChartComponent._constructGraphIfPossible): Fixed the bug that we were calling
        remove() on the wrong object (an array as opposed to elements in the array).
        (App.InteractiveChartComponent._highlightedItemsChanged): Check the length of _highlights as
        _highlights is always an array and evalutes to true.

2014-11-20  Ryosuke Niwa  <rniwa@webkit.org>

        New perf dashboard should provide UI to create a new analysis task
        https://bugs.webkit.org/show_bug.cgi?id=138910

        Reviewed by Benjamin Poulain.

        This patch reverts some parts of r175006 and re-introduces bugs associated with analysis tasks.
        I'll add UI to show and edit bug numbers associated with an analysis task in a follow up patch.

        With this patch, we can create a new analysis task by selection a range of points and opening
        "analysis pane" (renamed from "bugs pane"). Each analysis task created is represented by a yellow bar
        in the chart hyperlinked to the analysis task.

        * init-database.sql: Redefined the bugs to be associated with an analysis task instead of a test run.

        * public/api/analysis-tasks.php: Added the support for querying analysis tasks for a specific metric
        on a specific platform. Also retrieve and return all bugs associated with analysis tasks.
        (main):
        (fetch_and_push_bugs_to_tasks): Added. Fetches all bugs associated with an array of analysis tasks
        and adds the associated bugs to each task in the array.
        (format_task):

        * public/api/runs.php: Reverted changes made in r175006.
        (fetch_runs_for_config):
        (format_run): 

        * public/api/test-groups.php:
        (fetch_test_groups_for_task): Use the newly added Database::select_rows.

        * public/include/db.php:
        (Database::select_first_or_last_row):
        (Database::select_rows): Extracted from select_first_or_last_row.

        * public/v2/analysis.js:
        (App.AnalysisTask): Added "bugs" property.
        (App.Bug): Added now that bugs are regular data store objects.

        * public/v2/app.js:
        (App.Pane._fetch): Calls this.fetchAnalyticRanges to fetch analysis tasks as well as test runs.
        (App.Pane.fetchAnalyticRanges): Added. Fetches analysis tasks for the current metric on the current
        platform that are associated with a specific range of runs.
        (App.PaneController.actions.toggleBugsPane): Updated per showingBugsPane to showingAnalysisPane rename.
        (App.PaneController.actions.associateBug): Deleted.
        (App.PaneController.actions.createAnalysisTask): Replaced the pre-condition checks with assertions as
        this action should never be triggered when the pre-condition is not met. Also re-fetch analysis tasks
        once we've created one.
        (App.PaneController.toggleSearchPane): Updated per showingBugsPane to showingAnalysisPane rename.
        (App.PaneController._detailsChanged): Ditto. Removed selectedSinglePoint since it's no longer used.
        (App.PaneController._showDetails): Call _updateCanAnalyze to update the status of "Analyze" button.
        (App.PaneController._updateBugs): Deleted.
        (App.PaneController._updateMarkedPoints): Deleted.
        (App.PaneController._updateCanAnalyze): Added. Disables the button to create an analysis task when
        the name is missing or when at most one point is selected.
        
        (App.InteractiveChartComponent._constructGraphIfPossible): Update the locations of range rects.
        (App.InteractiveChartComponent._relayoutDataAndAxes): Ditto.
        (App.InteractiveChartComponent._mousePointInGraph): Don't return a point unless the mouse cursor is
        on our svg element to avoid locking the current item when a bar shown for an analysis task is clicked.
        (App.InteractiveChartComponent._rangesChanged): Added. Creates an array of objects representing
        clickable bars for analysis tasks.
        (App.InteractiveChartComponent._updateRangeBarRects): Computes the inline style used by each clickable
        bar for analysis tasks to place them at the right location.
        (App.InteractiveChartComponent.actions.openRange): Added. Forwards the action to the parent controller.

        * public/v2/chart-pane.css:
        (.chart .extent): Use the same color as the vertical indicator in the highlight behind the selection.
        (.chart .rangeBar): Added.

        * public/v2/data.js:
        (TimeSeries.prototype.nextPoint): Added. Used by _rangesChanged.

        * public/v2/index.html: Renamed "bugs pane" to "analysis pane" and removed the UI to associate bugs.
        This ability will be reinstated in a follow up patch. Also added a container div and spans for analysis
        task bars in the interactive chart component.

2014-11-19  Ryosuke Niwa  <rniwa@webkit.org>

        Fix typos in r176203.

        * public/v2/app.js:
        (App.ChartsController.actions.addPaneByMetricAndPlatform):
        (App.AnalysisTaskRoute):

2014-11-18  Ryosuke Niwa  <rniwa@webkit.org>

        Unreviewed. Updated the install instruction.

        * Install.md:

2014-11-17  Ryosuke Niwa  <rniwa@webkit.org>

        App.Manifest shouldn't use App.__container__.lookup
        https://bugs.webkit.org/show_bug.cgi?id=138768

        Reviewed by Andreas Kling.

        Removed the hack to find the store object via App.__container__.lookup.
        Pass around the store object instead.

        * public/v2/app.js:
        (App.DashboardRow._createPane): Add "store" property to the pane.
        (App.DashboardPaneProxyForPicker._platformOrMetricIdChanged): Ditto.
        (App.IndexController.gridChanged): Ditto.
        (App.IndexController.actions.addRow): Ditto.
        (App.IndexController.init): Ditto.
        (App.Pane._fetch): Ditto.
        (App.ChartsController._parsePaneList): Ditto.
        (App.ChartsController._updateQueryString): Ditto.
        (App.ChartsController.actions.addPaneByMetricAndPlatform): Ditto.
        (App.BuildPopup): Ditto.
        (App.AnalysisTaskRoute.model): Ditto.
        (App.AnalysisTaskViewModel._taskUpdated): Ditto.

        * public/v2/manifest.js:
        (App.Manifest.fetch): Removed the code to find the store object.

2014-11-08  Ryosuke Niwa  <rniwa@webkit.org>

        Fix Ember.js warnings the new perf dashboard
        https://bugs.webkit.org/show_bug.cgi?id=138531

        Reviewed by Darin Adler.

        Fixed various warnings.

        * public/v2/app.js:
        (App.InteractiveChartComponent._relayoutDataAndAxes): We can't use "rem". Use this._rem as done for x.
        * public/v2/data.js:
        (PrivilegedAPI._post): Removed the superfluous console.log.
        (CommitLogs.fetchForTimeRange): Ditto.
        * public/v2/index.html: Added tbody as required by the HTML specification.

2014-11-07  Ryosuke Niwa  <rniwa@webkit.org>

        Fix typos in r175768.

        * public/v2/app.js:
        (App.AnalysisTaskViewModel.roots):

2014-11-07  Ryosuke Niwa  <rniwa@webkit.org>

        Introduce the concept of analysis task to perf dashboard
        https://bugs.webkit.org/show_bug.cgi?id=138517

        Reviewed by Andreas Kling.

        Introduced the concept of an analysis task, which is created for a range of measurements for a given metric on
        a single platform and used to bisect regressions in the range.
        
        Added a new page to see the list of active analysis tasks and a page to view the contents of an analysis task.

        * init-database.sql: Added a bunch of tables to store information about analysis tasks.
            analysis_tasks - Represents each analysis task. Associated with a platform and a metric and possibly with two
            test runs. Analysis tasks not associated with test runs are used for try new patches.
            analysis_test_groups - A test group in an analysis task represents a bunch of related A/B testing results.
            root_sets - A root set represents a set of roots (or packages) installed in each A/B testing.
            build_requests - A build request represents a single pending build for A/B testing.

        * public/api/analysis-tasks.php: Added. Returns the specified analysis task or all analysis tasks in an array.
        (main):
        (format_task):

        * public/api/test-groups.php: Added. Returns analysis task groups for the specified analysis task or returns
        the specified analysis task group as well as build requests associated with them.
        (main):
        (fetch_test_groups_for_task):
        (fetch_build_requests_for_task):
        (fetch_build_requests_for_group):
        (format_test_group):
        (format_build_request):

        * public/include/json-header.php:
        (remote_user_name): Extracted from compute_token so that we can use it in create-analysis-task.php.
        (compute_token):

        * public/privileged-api/associate-bug.php:
        (main): Fixed a typo.

        * public/privileged-api/create-analysis-task.php: Added. Creates a new analysis task for a given test run range.
        (main):
        (ensure_row_by_id):
        (ensure_config_from_runs):

        * public/privileged-api/generate-csrf-token.php: Use remote_user_name.

        * public/v2/analysis.js: Added. Various Ember data store models to represent analysis tasks and related objects.
        (App.AnalysisTask):
        (App.AnalysisTask.create):
        (App.TestGroup):
        (App.TestGroupAdapter):
        (App.AnalysisTaskSerializer):
        (App.TestGroupSerializer):
        (App.BuildRequest):

        * public/v2/app.css: Added style rules for the analysis page.

        * public/v2/app.js:
        (App.Pane._fetch): Use fetchRunsWithPlatformAndMetric, which has been refactored into App.Manifest.

        (App.PaneController.actions.toggleBugsPane): Show bugs pane even when there are no bug trackers or there is not
        exactly one selected point as we can still create an analysis task.
        (App.PaneController.actions.associateBug): Renamed singlySelectedPoint to selectedSinglePoint to be more
        grammatical and also alert'ed the error message when there is one.
        (App.PaneController.actions.createAnalysisTask): Added. Creates a new analysis task and opens it in a new tab.
        Since window.open only works during the click, we open the new "window" preemptively and navigates or closes it
        once XHR request has completed.
        (App.PaneController._detailsChanged): Changes due to singlySelectedPoint to selectedSinglePoint rename.
        (App.PaneController._updateBugs): Fixed a bug that we were showing bugs in the previous point when a single point
        is selected in the details pane.

        (App.AnalysisRoute): Added.
        (App.AnalysisTaskRoute): Added.
        (App.AnalysisTaskViewModel): Added.
        (App.AnalysisTaskViewModel._taskUpdated): Fetch runs for the associated platform and metric.
        (App.AnalysisTaskViewModel._fetchedRuns): Setup the chart data to show.
        (App.AnalysisTaskViewModel.testSets): The computed property used to update roots for all repositories/projects.
        (App.AnalysisTaskViewModel._rootChangedForTestSet): Updates root selections for all repositories/projects when
        the user selects an option for all roots in A or B configuration.
        (App.AnalysisTaskViewModel.roots): The computed property used to show root choices for each repository/project.

        * public/v2/chart-pane.css: Added style rules for details view in the analysis task page.

        * public/v2/data.js:
        (Measurement.prototype._formatRevisionRange): Don't prefix a revision number with "At " when there is no previous
        point so that we can use it in App.AnalysisTaskViewModel.roots.
        (TimeSeries.prototype.findPointByMeasurementId): Added.
        (TimeSeries.prototype.seriesBetweenPoints): Added.

        * public/v2/index.html: Use Metric.fullName since the same value is needed in the analysis task page. Also added
        a button to create an analysis task, and made bugs pane button always enabled since we can an analysis task even
        when multiple points are selected. Finally, added a new template for the analysis task page.

        * public/v2/manifest.js:
        (App.Metric.fullName): Added to share code between the charts page and the analysis task page.
        (App.Manifest.fetchRunsWithPlatformAndMetric): Extracted from App.Pane._fetch to be reused in
        App.AnalysisTaskViewModel._taskUpdated.

2014-10-28  Ryosuke Niwa  <rniwa@webkit.org>

        Remove App.PaneController.bugsChangeCount in the new perf dashboard
        https://bugs.webkit.org/show_bug.cgi?id=138111

        Reviewed by Darin Adler.

        * public/v2/app.js:
        (App.PaneController.bugsChangeCount): Removed.
        (App.PaneController.actions.associateBug): Call _updateMarkedPoints instead of incrementing bugsChangeCount.
        (App.PaneController._updateMarkedPoints): Extracted from App.InteractiveChartComponent._updateDotsWithBugs.
        Finds the list of current run's points that are associated with bugs.
        (App.InteractiveChartComponent._updateMarkedDots): Renamed from _updateDotsWithBugs.
        * public/v2/chart-pane.css:
        (.chart .marked): Renamed from .hasBugs.
        * public/v2/index.html: Specify chartPointRadius and markedPoints.

2014-10-27  Ryosuke Niwa  <rniwa@webkit.org>

        REGRESSION: commit logs are not shown sometimes on the new dashboard UI
        https://bugs.webkit.org/show_bug.cgi?id=138099

        Reviewed by Benjamin Poulain.

        The bug was caused by _currentItemChanged not passing the previous point in the list of points and also
        _showDetails inverting the order of the current and old measurements.

        * public/v2/app.js:
        (App.PaneController._currentItemChanged): Pass in the previous point to _showDetails when there is one.
        (App.PaneController._showDetails): Since points are ordered chronologically, the last point is the
        current (latest) measurement and the first point is the oldest measurement.
        (App.CommitsViewerComponent.commitsChanged): Don't show a single measurement as a range for clarity.

2014-10-18  Ryosuke Niwa  <rniwa@webkit.org>

        Perf dashboard should provide a way to associate bugs with a test run
        https://bugs.webkit.org/show_bug.cgi?id=137857

        Reviewed by Andreas Kling.

        Added a "privileged" API, /privileged-api/associate-bug, to associate a bug with a test run.
        /privileged-api/ is to be protected by an authentication mechanism such as DigestAuth over https by
        the Apache configuration.


        The Cross Site Request (CSRF) Forgery prevention for privileged APIs work as follows. When a user is
        about to make a privileged API access, the front end code obtains a CSRF token generated by POST'ing
        to privileged-api/generate-csrf-token; the page sets a randomly generated salt and an expiration time
        via the cookie and returns a token computed from those two values as well as the remote username.

        The font end code then POST's the request along with the returned token. The server side code verifies
        that the specified token can be generated from the salt and the expiration time set in the cookie, and
        the token hasn't expired.


        * init-database.sql: Added bug_url to bug_trackers table, and added bugs table. Each bug tracker will
        have zero or exactly one bug associated with a test run.

        * public/admin/bug-trackers.php: Added the support for editing bug_url.
        * public/api/runs.php:
        (fetch_runs_for_config): Modified the query to fetch bugs associated with test_runs.
        (parse_bugs_array): Added. Parses the aggregated bugs and creates a dictionary that maps a tracker id to
        an associated bug if there is one.
        (format_run): Calls parse_bugs_array.

        * public/include/json-header.php: Added helper functions to deal for CSRF prevention.
        (ensure_privileged_api_data): Added. Dies immediately if the request's method is not POST or doesn't
        have a valid JSON payload.
        (ensure_privileged_api_data_and_token): Ditto. Also checks that the CSRF prevention token is valid.
        (compute_token): Computes a CSRF token using the REMOTE_USER (e.g. set via BasicAuth), the salt, and
        the expiration time stored in the cookie.
        (verify_token): Returns true iff the specified token matches what compute_token returns from the cookie.

        * public/include/manifest.php:
        (ManifestGenerator::bug_trackers): Include bug_url as bugUrl in the manifest. Also use tracker_id instead
        of tracker_name as the key in the manifest. This requires changes to both v1 and v2 front end.

        * public/index.html:
        (Chart..showTooltipWithResults): Updated for the manifest format changed mentioned above.

        * public/privileged-api/associate-bug.php: Added.
        (main): Added. Associates or dissociates a bug with a test run inside a transaction. It prevent a CSRF
        attack via ensure_privileged_api_data_and_token, which calls verify_token.

        * public/privileged-api/generate-csrf-token.php: Added. Generates a CSRF token valid for one hour.

        * public/v2/app.css:
        (.disabled .icon-button:hover g): Used by the "bugs" icon when a range of points or no points are
        selected in a chart.

        * public/v2/app.js:
        (App.PaneController.actions.toggleBugsPane): Added. Toggles the visibility of the bugs pane when exactly
        one point is selected in the chart. Also hides the search pane when making the bugs pane visible since
        they would overlap on each other if both of them are shown.
        (App.PaneController.actions.associateBug): Makes a privileged API request to associate the specified bug
        with the currently selected point (test run). Updates the bug information in "details" and colors of dots
        in the charts to reflect new states. Because chart data objects aren't real Ember objects for performance
        reasons, we have to use a dirty hack of modifying a dummy counter bugsChangeCount.
        (App.PaneController.actions.toggleSearchPane): Renamed from toggleSearch. Also hides the bugs pane when
        showing the search pane.
        (App.PaneController.actions.rangeChanged): Takes all selected points as the second argument instead of
        taking start and end points as the second and the third arguments so that _showDetails can enumerate all
        bugs in the selected range.

        (App.PaneController._detailsChanged): Added. Hide the bugs pane whenever a new point is selected.
        Also update singlySelectedPoint, which is used by toggleBugsPane and associateBug.
        (App.PaneController._currentItemChanged): Updated for the _showDetails change.
        (App.PaneController._showDetails): Takes an array of selected points in place of old arguments.
        Simplified the code to compute the revision information. Calls _updateBugs to format the associated bugs.
        (App.PaneController._updateBugs): Sets details.bugTrackers to a dictionary that maps a bug tracker id to
        a bug tracker proxy with an array of (bugNumber, bugUrl) pairs and also editedBugNumber, which is used by
        the bugs pane to associate or dissociate a bug number, if exactly one point is selected.

        (App.InteractiveChartComponent._updateDotsWithBugs): Added. Sets hasBugs class on dots as needed.
        (App.InteractiveChartComponent._setCurrentSelection): Finds and passes all points in the selected range
        to selectionChanged action instead of just finding the first and the last points.

        * public/v2/chart-pane.css: Updated the style.

        * public/v2/data.js:
        (PrivilegedAPI): Added. A wrapper for privileged APIs' CSRF tokens.
        (PrivilegedAPI.sendRequest): Makes a privileged API call. Fetches a new CSRF token if needed.
        (PrivilegedAPI._generateTokenInServerIfNeeded): Makes a request to privileged-api/generate-csrf-token if
        we haven't already obtained a CSRF token or if the token has already been expired.
        (PrivilegedAPI._post): Makes a single POST request to /privileged-api/* with a JSON payload.

        (Measurement.prototype.bugs): Added.
        (Measurement.prototype.hasBugs): Returns true iff bugs has more than one bug number.
        (Measurement.prototype.associateBug): Associates a bug with a test run via privileged-api/associate-bug.

        * public/v2/index.html: Added the bugs pane. Also added a list of bugs associated with the current run in
        the details.

        * public/v2/manifest.js:
        (App.BugTracker.bugUrl):
        (App.BugTracker.newBugUrl): Added.
        (App.BugTracker.repositories): Added. This was a missing back reference to repositories.
        (App.MetricSerializer.normalizePayload): Now parses/loads the list of bug trackers from the manifest.
        (App.Manifest.repositoriesWithReportedCommits): Now initialized to an empty array instead of null.
        (App.Manifest.bugTrackers): Added.
        (App.Manifest._fetchedManifest): Sets App.Manifest.bugTrackers. Also sorts the list of repositories by
        their respective ids to make the ordering stable.

2014-10-14  Ryosuke Niwa  <rniwa@webkit.org>

        Remove unused jobs table
        https://bugs.webkit.org/show_bug.cgi?id=137724

        Reviewed by Daniel Bates.

        Removed jobs table in the database as well as related code.

        * init-database.sql:
        * public/admin/jobs.php: Removed.
        * public/admin/tests.php:
        * public/include/admin-header.php:

2014-10-13  Ryosuke Niwa  <rniwa@webkit.org>

        New perf dashboard should have an ability to search commits by a keyword
        https://bugs.webkit.org/show_bug.cgi?id=137675

        Reviewed by Geoffrey Garen.

        /api/commits/ now accepts query parameters to search a commit by a keyword. Its output format changed to
        include "authorEmail" and "authorName" directly as columns instead of including an "author" object.
        This API change allows fetch_commits_between to generate results without processing Postgres query results.

        In the front end side, we've added a search pane in pane controller, and the interactive chart component
        now has a concept of highlighted items which is used to indicate commits found by the search pane.

        * public/api/commits.php:
        (main): Extract query parameters: keyword, from, and to and use that to fetch appropriate commits.
        (fetch_commits_between): Moved some code from main. Now takes a search term as the third argument.
        We look for a commit if its author name or email contains the keyword or if its revision matches the keyword.
        (format_commit): Renamed from format_commits. Now only formats one commit.

        * public/include/db.php:
        (Database::query_and_fetch_all): Now returns array() when the query results is empty (instead of false).

        * public/v2/app.css: Renamed .close-button to .icon-button since it's used by a search button as well.

        * public/v2/app.js:
        (App.Pane.searchCommit): Added. Finds the commits by a search term and assigns 'highlightedItems',
        which is a hash table that contains highlighted items' measurements' ids as keys.
        (App.PaneController.actions.toggleSearch): Toggles the visibility of the search pane. Also sets
        the default commit repository.
        (App.PaneController.actions.searchCommit): Delegates the work to App.Pane.searchCommit.
        (App.InteractiveChartComponent._constructGraphIfPossible): Fixed a bug that we weren't removing old this._dots.
        Added the code to initialize this._highlights.
        (App.InteractiveChartComponent._updateDimensionsIfNeeded): Updates dimensions of highlight lines.
        (App.InteractiveChartComponent._updateHighlightPositions): Added. Ditto.
        (App.InteractiveChartComponent._highlightedItemsChanged): Adds vertical lines for highlighted items and deletes
        the existing lines for the old highlighted items.
        (App.CommitsViewerComponent.commitsChanged): Updated the code per JSON API change mentioned above.
        Also fixed a bug that the code tries to update the commits viewer even if the viewer had already been destroyed. 

        * public/v2/chart-pane.css: Added style for the search pane and the search button.

        * public/v2/data.js: Turned FetchCommitsForTimeRange into a class: CommitLogs.
        (CommitLogs): Added.
        (CommitLogs.fetchForTimeRange): Renamed from FetchCommitsForTimeRange. Takes a search term as an argument.
        (CommitLogs._cachedCommitsBetween): Extracted from FetchCommitsForTimeRange.
        (CommitLogs._cacheConsecutiveCommits): Ditto.
        (FetchCommitsForTimeRange._cachedCommitsByRepository): Deleted.
        (Measurement.prototype.commitTimeForRepository): Extracted from formattedRevisions.
        (Measurement.prototype.formattedRevisions): Uses formattedRevisions. Deleted the unused code for commitTime.

        * public/v2/index.html: Added the search pane and the search button. Also removed the unused attribute binding
        for showingDetails since this property is no longer used.

        * public/v2/manifest.js:
        (App.Manifest.repositories): Added.
        (App.Manifest.repositoriesWithReportedCommits): Ditto. Used by App.PaneController.actions.toggleSearch to find
        the default repository to search.
        (App.Manifest._fetchedManifest): Populates repositories and repositoriesWithReportedCommits.

2014-10-13  Ryosuke Niwa  <rniwa@webkit.org>

        Unreviewed build fix after r174555.

        * public/include/manifest.php:
        (ManifestGenerator::generate): Assign an empty array to $repositories_with_commit when there are no commits.
        * tests/admin-regenerate-manifest.js: Fixed the test case.

2014-10-09  Ryosuke Niwa  <rniwa@webkit.org>

        New perf dashboard UI tries to fetch commits all the time
        https://bugs.webkit.org/show_bug.cgi?id=137592

        Reviewed by Andreas Kling.

        Added hasReportedCommits boolean to repository meta data in manifest.json, and used that in
        the front end to avoid issuing HTTP requests to fetch commit logs for repositories with
        no reported commits as they are all going to fail.

        Also added an internal cache to FetchCommitsForTimeRange in the front end to avoid fetching
        the same commit logs repeatedly. There are two data structures we cache: commitsByRevision
        which maps a given commit revision/hash to a commit object; and commitsByTime which is an array
        of commits sorted chronologically by time.

        * public/include/manifest.php:

        * public/v2/app.js:
        (App.CommitsViewerComponent.commitsChanged):

        * public/v2/data.js:
        (FetchCommitsForTimeRange):
        (FetchCommitsForTimeRange._cachedCommitsByRepository):

        * public/v2/manifest.js:
        (App.Repository):

2014-10-08  Ryosuke Niwa  <rniwa@webkit.org>

        Another unreviewed build fix after r174477.

        Don't try to insert a duplicated row into build_commits as it results in a database constraint error.

        This has been caught by a test in /api/report. I don't know why I thought all tests were passing.

        * public/include/report-processor.php:

2014-10-08  Ryosuke Niwa  <rniwa@webkit.org>

        Unreviewed build fix after r174477.

        * init-database.sql: Removed build_commits_index since it's redundant with build_commit's primary key.
        Also fixed a syntax error that we were missing "," after line that declared build_commit column.

        * public/api/runs.php: Fixed the query so that test_runs without commits data will be retrieved.
        This is necessary for baseline and target values manually added via admin pages.

2014-10-08  Ryosuke Niwa  <rniwa@webkit.org>

        Add v2 UI for the perf dashboard
        https://bugs.webkit.org/show_bug.cgi?id=137537

        Rubber-stamped by Andreas Kling.

        * public/v2: Added.
        * public/v2/app.css: Added.
        * public/v2/app.js: Added.
        * public/v2/chart-pane.css: Added.
        * public/v2/data.js: Added.
        * public/v2/index.html: Added.
        * public/v2/js: Added.
        * public/v2/js/d3: Added.
        * public/v2/js/d3/LICENSE: Added.
        * public/v2/js/d3/d3.js: Added.
        * public/v2/js/d3/d3.min.js: Added.
        * public/v2/js/ember-data.js: Added.
        * public/v2/js/ember.js: Added.
        * public/v2/js/handlebars.js: Added.
        * public/v2/js/jquery.min.js: Added.
        * public/v2/js/statistics.js: Added.
        * public/v2/manifest.js: Added.
        * public/v2/popup.js: Added.

2014-10-08  Ryosuke Niwa  <rniwa@webkit.org>

        Remove superfluously duplicated code in public/api/report-commits.php.

2014-10-08  Ryosuke Niwa  <rniwa@webkit.org>

        Perf dashboard should store commit logs
        https://bugs.webkit.org/show_bug.cgi?id=137510

        Reviewed by Darin Adler.

        For the v2 version of the perf dashboard, we would like to be able to see commit logs in the dashboard itself.

        This patch replaces "build_revisions" table with "commits" and "build_commits" relations to store commit logs,
        and add JSON APIs to report and retrieve them. It also adds a tools/pull-svn.py to pull commit logs from
        a subversion directory. The git version of this script will be added in a follow up patch.


        In the new database schema, each revision in each repository is represented by exactly one row in "commits"
        instead of one row for each build in "build_revisions". "commits" and "builds" now have a proper many-to-many
        relationship via "build_commits" relations.

        In order to migrate an existing instance of this application, run the following SQL commands:

        BEGIN;

        INSERT INTO commits (commit_repository, commit_revision, commit_time)
            (SELECT DISTINCT ON (revision_repository, revision_value)
                revision_repository, revision_value, revision_time FROM build_revisions);

        INSERT INTO build_commits (commit_build, build_commit) SELECT revision_build, commit_id
            FROM commits, build_revisions
            WHERE commit_repository = revision_repository AND commit_revision = revision_value;

        DROP TABLE build_revisions;

        COMMIT;


        The helper script to submit commit logs can be used as follows:

        python ./tools/pull-svn.py "WebKit" https://svn.webkit.org/repository/webkit/ https://perf.webkit.org
            feeder-slave feeder-slave-password 60 "webkit-patch find-users"

        The above command will pull the subversion server at https://svn.webkit.org/repository/webkit/ every 60 seconds
        to retrieve at most 10 commits, and submits the results to https://perf.webkit.org using "feeder-slave" and
        "feeder-slave-password" as the builder name and the builder password respectively.

        The last, optional, argument is the shell command to convert a subversion account to the corresponding username.
        e.g. "webkit-patch find-users rniwa@webkit.org" yields "Ryosuke Niwa" <rniwa@webkit.org> in the stdout.


        * init-database.sql: Replaced "build_revisions" relation with "commits" and "build_commits" relations.

        * public/api/commits.php: Added. Retrieves a list of commits based on arguments in its path of the form
            /api/commits/<repository-name>/<filter>. The behavior of this API depends on <filter> as follows:

            - Not specified - It returns every single commit for a given repository.
            - Matches "oldest" - It returns the commit with the oldest timestamp.
            - Matches "latest" - It returns the commit with the latest timestamp.
            - Matches "last-reported" - It returns the commit with the latest timestamp added via report-commits.php.
            - Is entirely alphanumeric - It returns the commit whose revision matches the filter.
            - Is of the form <alphanumeric>:<alphanumeric> or <alphanumeric>-<alphanumeric> - It retrieves the list
            of commits added via report-commits.php between two timestamps retrieved from commits whose revisions
            match the two alphanumeric values specified. Because it retrieves commits based on their timestamps,
            the list may contain commits that do not appear as neither hash's ancestor in git/mercurial.
        (main):
        (commit_from_revision):
        (fetch_commits_between):
        (format_commits):

        * public/api/report-commits.php: Added. A JSON API to report new subversion, git, or mercurial commits.
        See tests/api-report-commits.js for examples on how to use this API.

        * public/api/runs.php: Updated the query to use "commit_builds" and "commits" relations instead of
        "build_revisions". Regrettably, the new query is 20% slower but I'm going to wait until the new UI is ready
        to optimize this and other JSON APIs.

        * public/include/db.php:
        (Database::select_or_insert_row):
        (Database::update_or_insert_row): Added.
        (Database::_select_update_or_insert_row): Extracted from select_or_insert_row. Try to update first and then
        insert if the update fails for update_or_insert_row. Preserves the old behavior when $should_update is false.

        (Database::select_first_row):
        (Database::select_last_row): Added.
        (Database::select_first_or_last_row): Extracted from select_first_row. Fixed a bug that we were asserting
        $order_by to be not alphanumeric/underscore. Retrieve the last row instead of the first if $descending_order.

        * public/include/report-processor.php:
        (ReportProcessor::resolve_build_id): Store commits instead of build_revisions. We don't worry about the race
        condition for adding "build_commits" rows since we shouldn't have a single tester submitting the same result
        concurrently. Even if it happened, it will only result in a PHP error and the database will stay consistent.

        * run-tests.js:
        (pathToTests): Don't call path.resolve with "undefined" testName; It throws an exception in the latest node.js.

        * tests/api-report-commits.js: Added.
        * tests/api-report.js: Fixed a test per build_revisions to build_commits/commits replacement.

        * tools: Added.
        * tools/pull-svn.py: Added. See above for how to use this script.
        (main):
        (determine_first_revision_to_fetch):
        (fetch_revision_from_dasbhoard):
        (fetch_commit_and_resolve_author):
        (fetch_commit):
        (textContent):
        (resolve_author_name_from_email):
        (submit_commits):

2014-09-30  Ryosuke Niwa  <rniwa@webkit.org>

        Update Install.md for Mavericks and fix typos
        https://bugs.webkit.org/show_bug.cgi?id=137276

        Reviewed by Benjamin Poulain.

        Add the instruction to copy php.ini to enable the Postgres extension in PHP.

        Also use perf.webkit.org as the directory name instead of WebKitPerfMonitor.

        Finally, init-database.sql is no longer located inside database directory.

        * Install.md:

2014-08-11  Ryosuke Niwa  <rniwa@webkit.org>

        Report run id's in api/runs.php for the new dashboard UI
        https://bugs.webkit.org/show_bug.cgi?id=135813

        Reviewed by Andreas Kling.

        Include run_id in the generated JSON.

        * public/api/runs.php:
        (fetch_runs_for_config): Don't sort results by time since that has been done in the front end for ages now.
        (format_run):

2014-08-11  Ryosuke Niwa  <rniwa@webkit.org>

        Merging platforms mixes baselines and targets into reported data
        https://bugs.webkit.org/show_bug.cgi?id=135260

        Reviewed by Andreas Kling.

        When merging two platforms, move test configurations of a different type (baseline, target)
        as well as of different metric (Time, Runs).

        Also avoid fetching the entire table of runs just to see if there are no remaining runs.
        It's sufficient to detect one such test_runs object.

        * public/admin/platforms.php:
        (merge_platforms):

2014-07-30  Ryosuke Niwa  <rniwa@webkit.org>

        Merging platforms mixes baselines and targets into reported data
        https://bugs.webkit.org/show_bug.cgi?id=135260

        Reviewed by Geoffrey Garen.

        Make sure two test configurations we're merging are of the same type (e.g. baseline, target, current).
        Otherwise, we'll erroneously mix up runs for baseline, target, and current (reported values).

        * public/admin/platforms.php:

2014-07-23  Ryosuke Niwa  <rniwa@webkit.org>

        Build fix after r171361.

        * public/js/helper-classes.js:
        (.this.formattedBuildTime):

2014-07-22  Ryosuke Niwa  <rniwa@webkit.org>

        Perf dashboard spends 2s processing JSON data during the page loads
        https://bugs.webkit.org/show_bug.cgi?id=135152

        Reviewed by Andreas Kling.

        In the Apple internal dashboard, we were spending as much as 2 seconds
        converting raw JSON data into proper JS objects while loading the dashboard.

        This caused the apparent unresponsiveness of the dashboard despite of the fact
        charts themselves updated almost instantaneously.

        * public/index.html:
        * public/js/helper-classes.js:
        (TestBuild): Compute the return values of formattedTime and formattedBuildTime
        lazily as creating new Date objects and running string replace is expensive.
        (TestBuild.formattedTime):
        (TestBuild.formattedBuildTime):
        (PerfTestRuns.setResults): Added. Pushing each result was the biggest bottle neck.
        (PerfTestRuns.addResult): Deleted.

2014-07-18  Ryosuke Niwa  <rniwa@webkit.org>

        Perf dashboard shouldn't show the full git hash
        https://bugs.webkit.org/show_bug.cgi?id=135083

        Reviewed by Benjamin Poulain.

        Detect Git/Mercurial hash by checking the length.

        If it's a hash, use the first 8 characters in the label
        while retaining the full length to be used in hyperlinks.

        * public/js/helper-classes.js:
        (.this.formattedRevisions):
        (TestBuild):

2014-05-29  Ryosuke Niwa  <rniwa@webkit.org>

        Add an instruction on how to backup the database.
        https://bugs.webkit.org/show_bug.cgi?id=133391

        Rubber-stamped by Andreas Kling.

        * Install.md:

2014-04-08  Ryosuke Niwa  <rniwa@webkit.org>

        Build fix after r166479. 'bytes' is now abbreviated as 'B'.

        * public/js/helper-classes.js:
        (PerfTestRuns.smallerIsBetter):

2014-04-08  Ryosuke Niwa  <rniwa@webkit.org>

        Some CSS teaks.

        * public/common.css:
        (#title):
        * public/index.html:
        (#charts .pane):
        (#charts .arrow):

2014-04-03  Ryosuke Niwa  <rniwa@webkit.org>

        WebKitPerfMonitor: There should be a way to add all metrics of a suite without also adding subtests
        https://bugs.webkit.org/show_bug.cgi?id=131157

        Reviewed by Andreas Kling.

        Split "all metrics" into all metrics of a test suite and all subtests of the suite.
        This allows, for example, adding all metrics such as Arithmetic and Geometric for
        a given test suite without also adding its subtests.

        * public/index.html:
        (init.showCharts):
        (init):

2014-04-03  Ryosuke Niwa  <rniwa@webkit.org>

        WebKitPerfMonitor: Tooltips cannot be pinned after using browser's back button
        https://bugs.webkit.org/show_bug.cgi?id=131155

        Reviewed by Andreas Kling.

        The bug was caused by Chart.attach binding event listeners on plot container on each call.
        This resulted in the click event handler toggling the visiblity of the tooltip twice upon
        click when attach() has been called even number of times, keeping the tooltip invisible.

        Fixed the bug by extracting the code to bind event listeners outside of Chart.attach as
        a separate function, bindPlotEventHandlers, and calling it exactly once when Chart.attach
        is called for the first time.

        * public/index.html:
        (Chart.attach):
        (Chart..bindPlotEventHandlers):

2014-04-03  Ryosuke Niwa  <rniwa@webkit.org>

        WebKitPerfMonitor: Tooltips can be cut off at the top
        https://bugs.webkit.org/show_bug.cgi?id=130960

        Reviewed by Andreas Kling.

        * public/common.css:
        (#title): Removed the gradients, box shadows, and border from the header.
        (#title h1): Reduce the font size.
        (#title ul): Use line-height to vertically align the navigation bar instead of specifying a padding atop.
        * public/index.html:
        (.tooltop:before): Added. Identical to .tooltop:after except it's upside down (arrow facing up).
        (.tooltip.inverted:before): Show the arrow facing up when .inverted is set.
        (.tooltip.inverted:before): Hide the arrow facing down when .inverted is set.
        * public/js/helper-classes.js:
        (Tooltip.show): Show the tooltip below the point if placing it above the point results in the top of the
        tooltip extending above y=0.

2014-04-03  Ryosuke Niwa  <rniwa@webkit.org>

        WebKitPerfMonitor: Y-axis adjustment is too aggressive
        https://bugs.webkit.org/show_bug.cgi?id=130937

        Reviewed by Andreas Kling.

        Previously, adjusted min. and max. were defined as the two standards deviations away from EWMA of measured
        results. This had two major problems:
        1. Two standard deviations can be too small to show the confidence interval for results.
        2. Sometimes baseline and target can be more than two standards deviations away.

        Fixed the bug by completely rewriting the algorithm to compute the interval. Instead of blindly using two
        standard deviations as margins, we keep adding quarter the standard deviation on each side until more than 90%
        of points lie in the interval or we've expanded 4 standard deviations. Once this condition is met, we reduce
        the margin on each side separately to reduce the empty space on either side.

        A more rigorous approach would involve computing least squared value of results with respect to intervals
        but that seems like an overkill for a simple UI problem; it's also computationally expensive.

        * public/index.html:
        (Chart..adjustedIntervalForRun): Extracted from computeYAxisBoundsToFitLines.
        (Chart..computeYAxisBoundsToFitLines): Compute the min. and max. adjusted intervals out of adjusted intervals
        for each runs (current, baseline, and target) so that at least one point from each set of results is shown.
        We wouldn't see the difference between measured values versus baseline and target values otherwise.
        * public/js/helper-classes.js:
        (PerfTestResult.unscaledConfidenceIntervalDelta): Returns the default value if the confidence
        interval delta cannot be computed.
        (PerfTestResult.isInUnscaledInterval): Added. Returns true iff the confidence intervals lies
        within the given interval.
        (PerfTestRuns..filteredResults): Extracted from unscaledMeansForAllResults now that PerfTestRuns.min and
        PerfTestRuns.max need to use both mean and confidence interval delta for each result.
        (PerfTestRuns..unscaledMeansForAllResults):
        (PerfTestRuns.min): Take the confidence interval delta into account.
        (PerfTestRuns.max): Ditto.
        (PerfTestRuns.countResults): Returns the number of results in the given time frame (> minTime).
        (PerfTestRuns.countResultsInInterval): Returns the number of results whose confidence interval lie within the
        given interval.
        (PerfTestRuns.exponentialMovingArithmeticMean): Fixed the typo so that it actually computes the EWMA.

2014-03-31  Ryosuke Niwa  <rniwa@webkit.org>

        Some CSS tweaks after r166477 and r166479,

        * public/index.html:

2014-03-30  Ryosuke Niwa  <rniwa@webkit.org>

        WebKitPerfMonitor: Sometimes text inside panes overlap
        https://bugs.webkit.org/show_bug.cgi?id=130956

        Reviewed by Gyuyoung Kim.

        Revamped the pane UI. Now build info uses table element instead of plane text with BRs. The computed status of
        the latest result against baseline/target such as "3% until target" is now shown above the current value. This
        reduces the total height of the pane and fits more information per screen capita on the dashboard.

        * public/index.html: Updated and added a bunch of CSS rules for the new look.
        (.computeStatus): Don't append the build info here. The build info is constructed as a separate table now.
        (.createSummaryRowMarkup): Use th instead of td for "Current", "Baseline", and "Target" in the summary table.
        (.buildLabelWithLinks): Construct table rows instead of br separated lines of text. This streamlines the look
        of the build info shown in a chart pane and a tooltip.
        (Chart): Made .status a table.
        (Chart.populate): Prepend status.text, which contains text such as "3% until target", into the summary rows
        right above "Current" value, and populate .status with buildLabelWithLinks manually instead of status.text
        now that status.text no longer contains it.
        (Chart..showTooltipWithResults):  Wrap buildLabelWithLinks with a table element.

        * public/js/helper-classes.js:
        (TestBuild.formattedRevisions): Don't include repository names in labels since repository names are now added
        by buildLabelWithLinks inside th elements. Also place spaces around '-' between two different OS X versions.
        e.g. "OS X 10.8 - OS X 10.9" instead of "OS X 10.8-OS X 10.9".
        (PerfTestRuns): Use "/s" for "runs/s" and "B" for "bytes" to make text shorter in .status and .summaryTable.
        (PerfTestRuns..computeScalingFactorIfNeeded): Avoid placing a space between 'M' and a unit starting with a
        capital letter; e.g. "MB" instead of "M B".

2014-03-30  Ryosuke Niwa  <rniwa@webkit.org>

        WebKitPerfMonitor: Header and number-of-days slider takes up too much space
        https://bugs.webkit.org/show_bug.cgi?id=130957

        Reviewed by Gyuyoung Kim.

        Moved the slider into the header. Also reduced the spacing between the header and platform names.
        This reclaims 50px × width of the screen real estate.

        * public/common.css:
        (#title): Reduced the space below the header from 20px to 10px.
        * public/index.html:
        (#numberOfDaysPicker): Removed the rounded border around the number-of-days slider.
        (#dashboard > tbody > tr > td): Added a 1.5em padding at the bottom.
        (#dashboard > thead th): That allows us to remove the padding at the top here. This reduces the wasted screen
        real estate between the header and the platform names.

2014-03-10  Zoltan Horvath  <zoltan@webkit.org>

        Update the install guidelines for perf.webkit.org
        https://bugs.webkit.org/show_bug.cgi?id=129895

        Reviewed by Ryosuke Niwa.

        The current install guideline for perf.webkit.org discourages the use of the installed
        Server application. I've actualized the documentation for Mavericks, and modified the
        guideline to include the instructions for Server.app also.

        * Install.md:

2014-03-08  Zoltan Horvath  <zoltan@webkit.org>

        Update perf.webkit.org json example
        https://bugs.webkit.org/show_bug.cgi?id=129907

        Reviewed by Andreas Kling.

        The current example is not valid json syntax. I fixed the syntax errors and indented the code properly.

        * ReadMe.md:

2014-01-31  Ryosuke Niwa  <rniwa@webkit.org>

        Merge database-common.js and utility.js into run-tests.js.

        Reviewed by Matthew Hanson.

        Now that run-tests is the only node.js script, merged database-common.js and utility.js into it.
        Also moved init-database.sql out of the database directory and removed the directory entirely.

        * database: Removed.
        * database/database-common.js: Removed.
        * database/utility.js: Removed.
        * init-database.sql: Moved from database/init-database.sql.
        * run-tests.js:
        (connect): Moved from database-common.js.
        (pathToDatabseSQL): Extracted from pathToLocalScript.
        (pathToTests): Moved from database-common.js.
        (config): Ditto.
        (TaskQueue): Ditto.
        (SerializedTaskQueue): Ditto.
        (main):
        (initializeDatabase):
        (TestEnvironment.it):
        (TestEnvironment.queryAndFetchAll):
        (sendHttpRequest):

2014-01-30  Ryosuke Niwa  <rniwa@webkit.org>

        Remove the dependency on node.js from the production code.

        Reviewed by Ricky Mondello.

        Work towards <rdar://problem/15955053> Upstream SafariPerfMonitor.

        Removed node.js dependency from TestRunsGenerator. It was really a design mistake to invoke node.js from php.
        It added so much complexity with only theoretical extensibility of adding aggregators.  It turns out that
        many aggregators we'd like to add are a lot more complicated than ones that could be written under the current
        infrastructure, and we need to make the other aspects (e.g. the level of aggregations) a lot more extensible.
        Removing and simplifying TestRunsGenerator allows us to implement such extensions in the future.

        Also removed the js files that are no longer used.

        * config.json: Moved from database/config.json.
        * database/aggregate.js: Removed. No longer used.
        * database/database-common.js: Removed unused functions, and updated the path to config.json.
        * database/process-jobs.js: Removed. No longer used.
        * database/sample-data.sql: Removed. We have a much better corpus of data now.
        * database/schema.graffle: Removed. It's completely obsolete.
        * public/include/db.php: Updated the path to config.json.
        * public/include/evaluator.js: Removed.

        * public/include/report-processor.php:
        (TestRunsGenerator::aggregate): Directly aggregate values via newly added aggregate_values method instead of
        storing values into $expressions and calling evaluate_expressions_by_node.
        (TestRunsGenerator::aggregate_values): Added.
        (TestRunsGenerator::compute_caches): Directly compute the caches.

2014-01-30  Ryosuke Niwa  <rniwa@webkit.org>

        Build fix. Don't fail the platform merges even if there are no test configurations to be moved to the new platform.

        * public/admin/platforms.php:
        * public/include/db.php:

2014-01-30  Ryosuke Niwa  <rniwa@webkit.org>

        Zoomed y-axis view is ununsable when the last result is an outlier.

        Reviewed by Stephanie Lewis.

        Show two standard deviations from the exponential moving average with alpha = 0.3 instead of the mean of
        the last result so that the graph looks sane if the last result was an outlier. However, always show
        the last result's mean even if it was an outlier.

        * public/index.html:
        * public/js/helper-classes.js:
        (unscaledMeansForAllResults): Extracted from min/max/sampleStandardDeviation.
        Also added the ability to cache the unscaled means to avoid recomputation.
        (PerfTestRuns.min): Refactored to use unscaledMeansForAllResults.
        (PerfTestRuns.max): Ditto.
        (PerfTestRuns.sampleStandardDeviation): Ditto.
        (PerfTestRuns.exponentialMovingArithmeticMean): Added.

2014-01-30  Ryosuke Niwa  <rniwa@webkit.org>

        Minor fixes.

        * public/admin/tests.php:
        * public/js/helper-classes.js:

2014-01-29  Ryosuke Niwa  <rniwa@webkit.org>

        Use two standard deviations instead as I mentioned in the mailing list.

        * public/index.html:

2014-01-28  Ryosuke Niwa  <rniwa@webkit.org>

        The performance dashboard erroneously shows upward arrow for combined metrics.

        A single outlier can ruin the zoomed y-axis view.

        Rubber-stamped by Antti Koivisto.

        * public/index.html:
        (computeYAxisBoundsToFitLines): Added adjustedMax and adjustedMin, which are pegged at 4 standard deviations
        from the latest results' mean.
        (Chart): Renamed shouldStartYAxisAtZero to shouldShowEntireYAxis.
        (Chart.attachMainPlot): Use the adjusted max and min when we're not showing the entire y-axis.
        (Chart.toggleYAxis):
        * public/js/helper-classes.js:
        (PerfTestRuns.sampleStandardDeviation): Added.
        (PerfTestRuns.smallerIsBetter): 'Combined' is a smaller is better metric.

2014-01-28  Ryosuke Niwa  <rniwa@webkit.org>

        Don't include the confidence interval when computing the y-axis.

        Rubber-stamped by Simon Fraser.

        * public/js/helper-classes.js:
        (PerfTestRuns.min):
        (PerfTestRuns.max):

2014-01-25  Ryosuke Niwa  <rniwa@webkit.org>

        Tiny CSS tweak for tooltips.

        * public/index.html:

2014-01-25  Ryosuke Niwa  <rniwa@webkit.org>

        Remove the erroneously repeated code.

        * public/admin/test-configurations.php:

2014-01-24  Ryosuke Niwa  <rniwa@webkit.org>

        <rdar://problem/15704893> perf dashboard should show baseline numbers

        Reviewed by Stephanie Lewis.

        * public/admin/bug-trackers.php:
        (associated_repositories): Return an array of HTMLs instead of echo'ing as expected by AdministrativePage.
        Also fixed a typo.

        * public/admin/platforms.php:
        (merge_list): Ditto.

        * public/admin/test-configurations.php: Added.
        (add_run): Adds a "synthetic" test run and a corresponding build. It doesn't create run_iterations and
        build_revisions as they're not meaningful for baseline / target numbers.
        (delete_run): Deletes a synthetic test run and its build. It verifies that the specified build has exactly
        one test run so that we don't accidentally delete a reported test run.
        (generate_rows_for_configurations): Generates rows of configuration IDs and types.
        (generate_rows_for_test_runs): Ditto for test runs. It also emits the form to add new "synthetic" test runs
        and delete existing ones.

        * public/admin/tests.php: We wrongfully assumed there is exactly one test configuration for each metric
        on each platform; there could be configurations of distinct types such as "current" and "baseline".
        Thus, update all test configurations for a given metric when updating config_is_in_dashboard.

        * public/api/runs.php: Remove the NotImplemented when we have multiple test configurations.
        (fetch_runs_for_config): "Synthetic" test runs created on test-configurations page are missing revision
        data so we need to left-outer-join (instead of inner-join) build_revisions. To avoid making the query
        unreadable, don't join revision_repository here. Instead, fetch the list of repositories upfront and
        resolve names in parse_revisions_array. This actually reduces the query time by ~10%.

        (parse_revisions_array): Skip an empty array created for "synthetic" test runs.

        * public/include/admin-header.php:
        (AdministrativePage::render_table): Now custom columns support sub columns. e.g. a configuration column may
        have id and type sub columns, and each custom column could generate multiple rows.

        Any table with sub columns now generates two rows for thead. We generate td's in in the first row without
        sub columns with rowspan of 2, and generate ones with sub columns with colspan set to the sub column count.
        We then proceed to generate the second header row with sub column names.

        When generating the actual content, we first generate all custom columns as they may have multiple rows in
        which case regular columns need rowspan set to the maximum number of rows.

        Once we've generated the first row, we proceed to generate subsequent rows for those custom columns that
        have multiple rows.

        (AdministrativePage::render_custom_cells): Added. This function is responsible for generating table cells
        for a given row in a given custom column. It generates an empty td when the custom column doesn't have
        enough rows. It also generates empty an td when it doesn't have enough columns in some rows except when
        the entire row consists of exactly one cell for a custom column with sub columns, in which case the cell is
        expanded to occupy all sub columns.

        * public/include/manifest.php:
        (ManifestGenerator::platforms): Don't add the metric more than once.

        * public/include/test-name-resolver.php:
        (TestNameResolver::__construct): We had wrongfully assumed that we have exactly one test configuration on
        each platform for each metric like tests.php. Fixed that. Also fetch the list of aggregators to compute the
        full metric name later.
        (TestNameResolver::map_metrics_to_tests): Populate $this->id_to_metric.
        (TestNameResolver::test_id_for_full_name): Simplified the code using array_get.
        (TestNameResolver::full_name_for_test): Added.
        (TestNameResolver::full_name_for_metric): Added.
        (TestNameResolver::configurations_for_metric_and_platform): Renamed as it returns multiple configurations.

        * public/js/helper-classes.js:
        (TestBuild): Use the build time as the maximum time when revision information is missing for "synthetic"
        test runs created to set baseline and target points.

2014-01-24  Ryosuke Niwa  <rniwa@webkit.org>

        Build fix after r57928. Removed a superfluous close parenthesis.

        * public/api/runs.php:

2014-01-24  Ryosuke Niwa  <rniwa@webkit.org>

        Unreviewed build & typo fixes.

        * public/admin/platforms.php:
        * tests/admin-platforms.js:

2014-01-24  Ryosuke Niwa  <rniwa@webkit.org>

        <rdar://problem/15704893> perf dashboard should show baseline numbers

        Rubber-stamped by Antti Koivisto.

        Organize some code into functions in runs.php.

        Also added back $paths that was erroneously removed in r57925 from json-header.php.

        * public/api/runs.php:
        (fetch_runs_for_config): Extracted.
        (format_run): Ditto.

2014-01-23  Ryosuke Niwa  <rniwa@webkit.org>

        Merge the upstream json-shared.php as of https://trac.webkit.org/r162693.

        * database/config.json:
        * public/admin/reprocess-report.php:
        * public/api/report.php:
        * public/api/runs.php:
        * public/include/json-header.php:

2014-01-23  Ryosuke Niwa  <rniwa@webkit.org>

        Commit yet another forgotten change.

        Something went horribly wrong with my merge :(

        * database/init-database.sql:

2014-01-23  Ryosuke Niwa  <rniwa@webkit.org>

        Commit one more forgotten change. Sorry for making a mess here.

2014-01-23  Ryosuke Niwa  <rniwa@webkit.org>

        Commit the forgotten files.

        * public/admin/platforms.php: Added.
        * tests/admin-platforms.js: Added.

2014-01-23  Ryosuke Niwa  <rniwa@webkit.org>

        <rdar://problem/15889905> SafariPerfMonitor: there should be a way to merge and hide platforms

        Reviewed by Stephanie Lewis.

        Added /admin/platforms/ page to hide and merge platforms.

        Merging two platforms is tricky because we need to migrate test runs as well as some test configurations.
        Recall that each test (e.g. Dromaeo) can have many "test metrics" (e.g. MaxAllocations, EndAllocations),
        and they have a distinct "test configuration" for each platform (e.g. MaxAllocation on Mountain Lion), and
        each test configuration a distinct "test run" for each build.

        In order to merge platform A into platform B, we must migrate all test runs that belong to platform A via
        their test configurations into platform B.

        Suppose we're migrating a test run R for test configuration T_A in platform A for metric M. Since M exists
        independent of platforms, R should continue to relate to M through some test configuration. Unfortunately,
        we can't simply move T_A into platform B since we may already have a test configuration T_B for metric M
        in platform B, in which case R should relate to T_B instead.

        Thus, we first migrate all test runs for which we already have corresponding test configurations in the
        new platform. We then migrate the test configurations of the remaining test runs.

        * database/init-database.sql: Added platform_hidden.

        * public/admin/platforms.php: Added.
        (merge_platforms): Added. Implements the algorithm described above.
        (merge_list): Added.

        * public/admin/tests.php: Disable the checkbox to show a test configuration on the dashboard if its platform
        is hidden since it doesn't do anything.

        * public/include/admin-header.php: Added the hyperlink to /admin/platforms.
        (update_field): Don't bail out if the newly added "update-column" is set to the field name even if $_POST is
        missing it since unchecked checkbox doesn't set the value in $_POST.
        (AdministrativePage::render_form_control_for_column): Added the support for boolean edit mode. Also used
        switch statement instead of repeated if's.
        (AdministrativePage::render_table): Emit "update-column" for update_field.

        * public/include/db.php: Disable warnings when we're not in the debug mode.

        * public/include/manifest.php:
        (ManifestGenerator::platforms): Skip platforms that have been hidden.

        * run-tests.js:
        (TestEnvironment.postJSON):
        (TestEnvironment.httpGet):
        (TestEnvironment.httpPost): Added.
        (sendHttpRequest): Set the content type if specified.

        * tests/admin-platforms.js: Added tests.

2014-01-22  Ryosuke Niwa  <rniwa@webkit.org>

        Extract the code to compute full test names from tests.php.

        Reviewed by Stephanie Lewis.

        Extracted TestNameResolver out of tests.php. This reduces the number of global variables in tests.php
        and paves our way to re-use the code in other pages.

        * public/admin/tests.php:

        * public/include/db.php:
        (array_set_default): Renamed from array_item_set_default and moved from tests.php as it's used in both
        tests.php and test-name-resolver.php.

        * public/include/test-name-resolver.php: Added.
        (TestNameResolver::__construct):
        (TestNameResolver::compute_full_name): Moved from tests.php.
        (TestNameResolver::map_metrics_to_tests): Ditto.
        (TestNameResolver::sort_tests_by_full_name): Ditto.
        (TestNameResolver::tests): Added.
        (TestNameResolver::test_id_for_full_name): Ditto.
        (TestNameResolver::metrics_for_test_id): Ditto.
        (TestNameResolver::child_metrics_for_test_id): Ditto.
        (TestNameResolver::configuration_for_metric_and_platform): Ditto.

2014-01-21  Ryosuke Niwa  <rniwa@webkit.org>

        <rdar://problem/15867325> Perf dashboard is erroneously associating reported results with old revisions

        Reviewed by Stephanie Lewis.

        Add the ability to reprocess reports so that I can re-associate wrongfully associated reports.

        Added public/admin/reprocess-report.php. It doesn't have any nice UI to find reports and it returns JSON
        but that's sufficient to correct the wrongfully processed reports for now.

        * public/admin/reprocess-report.php: Added. Takes a report id in $_GET or $_POST and process the report.
        We should eventually add a nice UI to find and reprocess reports.

        * public/api/report.php: ReportProcessor and TestRunsGenerator have been removed.

        * public/include/db.php: Added the forgotten call to prefixed_column_names.

        * public/include/report-processor.php: Copied from public/api/report.php.
        (ReportProcessor::__construct): Fetch the list of aggregators here for simplicity.
        (ReportProcessor::process): Optionally takes $existing_report_id. When this value is specified, we don't
        create a new report or authenticate the builder password (the password is never stored in the report).
        Also use select_first_row instead of query_and_fetch_all to find the builder for simplicity.
        (ReportProcessor::construct_build_data): Extracted from store_report_and_get_build_data.
        (ReportProcessor::store_report): Ditto.

        * tests/admin-reprocess-report.js: Added.

2014-01-21  Ryosuke Niwa  <rniwa@webkit.org>

        <rdar://problem/15867325> Perf dashboard is erroneously associating reported results with old revisions

        Reviewed by Ricky Mondello.

        The bug was caused by a build fix r57645. It attempted to treat multiple reports from the same builder
        for the same build number as a single build by ignoring build time. This was necessary to associate
        multiple reports by a single build - e.g. for different performance test suites - because the scripts
        we use to submit results computed its own "build time" when they're called.

        An unintended consequence of this change was revealed when we moved a buildbot master to the new machine
        last week; new reports were wrongfully associated with old build numbers.

        Fixed the bug by not allowing reports made more than 1 day after the initial build time to be assigned
        to the same build. Instead, we create a new build object for those reports. Since the longest set of
        tests we have only take a couple of hours to run, 24 hours should be more than enough.

        * database/init-database.sql: We can no longer constrain that each build number is unique to a builder
        or that build number and build time pair is unique. Instead, constrain the uniqueness of the tuple
        (builder, build number, build time).

        * public/api/report.php:
        (ReportProcessor::resolve_build_id): Look for any builds made within the past one day. Create a new build
        when no such build exists. This prevents a report from being associated with a very old build of the same
        build number.

        Also check that revision numbers or hashes match when we're adding revision info. This will let us catch
        a similar bug in the future sooner.

        * tests/api-report.js: Added three test cases.

2014-01-20  Ryosuke Niwa  <rniwa@webkit.org>

        Merged the upstream changes to db.php
        See http://trac.webkit.org/browser/trunk/Websites/test-results/public/include/db.php

        * public/include/db.php:

2014-01-20  Ryosuke Niwa  <rniwa@webkit.org>

        Update other scripts and tests per previous patch.

        * public/include/manifest.php:
        * tests/admin-regenerate-manifest.js:

2014-01-20  Ryosuke Niwa  <rniwa@webkit.org>

        Remove metrics_unit.

        Reviewed by Ricky Mondello.

        This column is no longer used by the front-end code since r48360.

        * database/init-database.sql:
        * public/admin/tests.php:

2014-01-16  Ryosuke Niwa  <rniwa@webkit.org>

        Unreviewed build fix.

        * public/api/report.php:

2014-01-15  Ryosuke Niwa  <rniwa@webkit.org>

        <rdar://problem/15832456> Automate DoYouEvenBench (124497)

        Reviewed by Ricky Mondello.

        Support a new alternative format for aggregated results where we have raw values as well as
        the list aggregators so that instead of
        "metrics": {"Time": ["Arithmetic"]}
        we can have
        "metrics": {"Time": { "aggregators" : ["Arithmetic"], "current": [300, 310, 320, 330] }}

        This allows single JSON generated by run-perf-tests in WebKit to be shared between the perf
        dashboard and the generated results page, which doesn't know how to aggregate values.

        We need to keep the support for the old format because all other existing performance tests
        all rely on the old format. Even if we updated the tests, we need the dashboard to support
        the old format during the transition.

        * public/api/report.php:
        (ReportProcessor::recursively_ensure_tests): Support the new format in addition to the old one.
        (ReportProcessor::aggregator_list_if_exists): Replaced is_list_of_aggregators.

        * tests/api-report.js: Updated one of aggregator test cases to test the new format.

2013-05-31  Ryosuke Niwa  <rniwa@webkit.org>

        Unreviewed; Tweak the CSS so that chart panes align vertically.

        * public/index.html:

2013-05-31  Ryosuke Niwa  <rniwa@webkit.org>

        SafariPerfMonitor should support Combined metric.

        * public/js/helper-classes.js:
        (PerfTestRuns): Added 'Combined' metric. In general, it could be used for smaller-is-better
        value as well but assume it to be greater-is-better for now.

2013-05-30  Ryosuke Niwa  <rniwa@webkit.org>

        Commit the forgotten init-database change to add iteration_relative_time.

        * database/init-database.sql:

2013-05-30  Ryosuke Niwa  <rniwa@webkit.org>

        <rdar://problem/13993069> SafariPerfMonitor: Support accepting (relative time, value) pairs

        Reviewed by Ricky Mondello.

        Add the support for each value to have a relative time. This is necessary for frame rate history
        since a frame rate needs to be associated with a time it was sampled.

        * database/init-database.sql: Added iteration_relative_time to run_iterations.

        * public/api/report.php:
        (TestRunsGenerator::test_value_list_to_values_by_iterations): Reject any non-numeral values here.
        This code is used to aggregate values but it doesn't make sense to aggregate iteration values
        with relative time since taking the average of two frame rates for two subtests taken at two
        different times doesn't make any sense.
        (TestRunsGenerator::compute_caches): When we encounter an array value while computing sum, mean,
        etc..., use the second element since we assume values are of the form (relative time, frame rate).
        Also exit early with an error if the number of elements in the array is not a pair.
        (TestRunsGenerator::commit): Store the relative time and the frame rate as needed.

        * tests/api-report.js: Added a test case. Also modified existing test cases to account for
        iteration_relative_time.

2013-05-27  Ryosuke Niwa  <rniwa@webkit.org>

        <rdar://problem/13654488> SafariPerfMonitor: Support accepting single-value results

        Reviewed by Ricky Mondello.

        Support that. It's one line change.

        * public/api/report.php:
        (ReportProcessor.recursively_ensure_tests): When there is exactly one value, wrap it inside an array
        to match the convention assumed elsewhere.
        * tests/api-report.js: Added a test case.

2013-05-26  Ryosuke Niwa  <rniwa@webkit.org>

        SafariPerfMonitor shows popups for points outside of the visible region.

        Rubber-stamped by Simon Fraser.

        * public/index.html:
        (Chart.closestItemForPageXRespectingPlotOffset): renamed from closestItemForPageX.
        (Chart.attach): Always use closestItemForPageXRespectingPlotOffset to work around the fact flot
        may return an item underneath y-axis labels.

2013-05-26  Ryosuke Niwa  <rniwa@webkit.org>

        Tweak the CSS a little to avoid the test name overlapping with the summary table.

        * public/index.html:

2013-05-26  Ryosuke Niwa  <rniwa@webkit.org>

        Unreviewed. Fix the typo. The anchor element should wrap the svg element, not the other way around.

        * public/index.html:

2013-05-26  Ryosuke Niwa  <rniwa@webkit.org>

        <rdar://problem/13992266> Should be a toggle to show entire Y-axis range
        <rdar://problem/13992271> Should scale Y axis to include error ranges

        Reviewed by Ricky Mondello.

        Add the feature. Also made adjust y-axis respect confidence interval delta so that the gray shade behind
        the main graph doesn't go outside the graph even when the y-axis is adjusted.

        * database/config.json:
        * public/index.html:
        (Chart): Add a SVG arrow to toggle y-axis mode, and bind click on the arrow to toggleYAxis().
        (Chart.attachMainPlot): Respect shouldStartYAxisAtZero.
        (Chart.toggleYAxis): Toggle the y-axis mode of this chart by toggling shouldStartYAxisAtZero and calling
        attachMainPlot.
        * public/js/helper-classes.js:
        (PerfTestResult.confidenceIntervalDelta):
        (PerfTestResult.unscaledConfidenceIntervalDelta): Extracted.
        (PerfTestRuns.min): Take confidence interval delta into account.
        (PerfTestRuns.max): Ditto.
        (PerfTestRuns.hasConfidenceInterval): Not sure why this function was checking the typeof. Just use isNaN.

2013-04-26  Ryosuke Niwa  <rniwa@webkit.org>

        A build fix of the previous. Don't look for a test with NULL parent because NULL != NULL in our beloved SQL.

        * public/api/report.php:
        (ReportProcessor::recursively_ensure_tests):
        * tests/api-report.js: Added a test.

2013-04-26  Ryosuke Niwa  <rniwa@webkit.org>

        Unreviewed build fixes.

        * public/api/report.php:
        (ReportProcessor::process): Explicitly exit with error when builder name or build time is missing.
        Also, tolerate reports without any revision information.

        (ReportProcessor::recursively_ensure_tests): When looking for a test, don't forget to compare its
        parent test.

        * tests/api-report.js: Added few test cases.

2013-04-26  Ryosuke Niwa  <rniwa@webkit.org>

        Commit another change that was supposed to be committed in r50331.

        * run-tests.js:
        (TestEnvironment.this.postJSON):
        (TestEnvironment.this.httpGet):
        (sendHttpRequest):

2013-04-09  Ryosuke Niwa  <rniwa@webkit.org>

        Commit the remaining files.

        * public/admin/regenerate-manifest.php:
        * public/include/admin-header.php:
        * public/include/json-header.php:
        * public/include/manifest.php:
        * run-tests.js:
        (TestEnvironment.this.postJSON):
        (TestEnvironment.this.httpGet):
        (sendHttpRequest):

2013-03-15  Ryosuke Niwa  <rniwa@webkit.org>

        SafariPerfMonitor: Add some tests for admin/regenerate-manifest.

        Reviewed by Ricky Mondello.

        Added some tests for admin/regenerate-manifest.

        * public/admin/regenerate-manifest.php: Use require_once instead of require.
        * public/include/admin-header.php: Ditto.
        * public/include/json-header.php: Ditto.

        * public/include/manifest.php:
        (ManifestGenerator::builders): Removed a reference to a non-existent variable.
        When there are no builders, simply return an empty array.

        * run-tests.js:
        (TestEnvironment.postJSON):
        (TestEnvironment.httpGet): Added.
        (sendHttpRequest): Renamed from postHttpRequest as it now takes method as an argument.

        * tests/admin-regenerate-manifest.js: Added with a bunch of test cases.

2013-03-14  Ryosuke Niwa  <rniwa@webkit.org>

        Unreviewed. Added more tests for api/report to ensure it creates tests, metrics, test_runs,
        and run_iterations. Also fixed a typo in report.php found by new tests.

        * public/api/report.php:
        (main): Fix a bug in the regular expression to wrap numbers with double quotations.
        * tests/api-report.js: Added more test cases.

2013-03-12  Ryosuke Niwa  <rniwa@webkit.org>

        <rdar://problem/13399038> SafariPerfMonitor: Need integration tests

        Reviewed by Ricky Mondello.

        Add a test runner script and some simple test cases.

        * database/config.json: Added the configuration for "testServer".
        * database/database-common.js:
        (pathToTests): Added.
        * run-tests.js: Added.
        (main):

        (confirmUserWantsDatabaseToBeInitializedIfNeeded): Checks whether there are any non-empty tables,
        and if there are, asks the user if it’s okay to delete all of the data contained therein.
        (confirmUserWantsDatabaseToBeInitializedIfNeeded.findNonEmptyTable): Find a table with non-zero
        number of rows.
        (confirmUserWantsDatabaseToBeInitializedIfNeeded.fetchTableNames): Fetch the list of all tables
        in the current database using PostgreSQL's information_schema.
        (askYesOrNoQuestion):

        (initializeDatabase): Executes init-database.sql. It drops all tables and creates them again.

        (TestEnvironment): The global object exposed in tests. Provides various utility functions.
        (TestEnvironment.assert): Exposes assert to tests.
        (TestEnvironment.console): Exposes console to tests.
        (TestEnvironment.describe): Adds a description.
        (TestEnvironment.it): Adds a test case.
        (TestEnvironment.postJSON):
        (TestEnvironment.queryAndFetchAll):
        (TestEnvironment.sha256):
        (TestEnvironment.notifyDone): Ends the current test case.

        (postHttpRequest):

        (TestContext): An object created for each test case. Conceptually, this object is always on
        "stack" when a test case is running. TestEnvironment and an uncaughtException handler accesses
        this object via currentTestContext.
        (TestContext.description):
        (TestContext.done):
        (TestContext.logError):

        * tests: Added.
        * tests/api-report.js: Added some basic tests for /api/report.php.

2013-03-08  Ryosuke Niwa  <rniwa@webkit.org>

        Unreviewed administrative page fix. Make it possible to remove all configuration from dashboard.

        The problem was that we were detecting whether we're updating dashboard or not by checking
        the existence of metric_configurations in $_POST but this key doesn't exist when we're removing
        all configurations. Use separate 'dashboard' action to execute the code even when
        metric_configurations is empty.

        * public/admin/tests.php:

2013-03-08  Ryosuke Niwa  <rniwa@webkit.org>

        SafariPerfMonitor: Extract a class to aggregate and store values from ReportProcessor.

        Reviewed by Ricky Mondello.

        This patch extracts TestRunsGenerator, which aggregates and compute caches of values,
        from ReportProcessor as a preparation to replace deprecated aggregate.js.

        * public/api/report.php:
        (ReportProcessor::exit_with_error): Moved.
        (ReportProcessor::process): Use the extracted TestRunsGenerator.
        (TestRunsGenerator): Added.
        (TestRunsGenerator::exit_with_error): Copied from ReportProcessor.
        (TestRunsGenerator::add_aggregated_metric): Moved.
        (TestRunsGenerator::add_values_for_aggregation): Moved. Made public.
        (TestRunsGenerator::aggregate): Moved. Made public.
        (TestRunsGenerator::aggregate_current_test_level): Moved.
        (TestRunsGenerator::test_value_list_to_values_by_iterations): Moved.
        (TestRunsGenerator::evaluate_expressions_by_node): Moved.
        (TestRunsGenerator::compute_caches): Moved. Made public.
        (TestRunsGenerator::add_values_to_commit): Moved. Made public.
        (TestRunsGenerator::commit): Moved. Made public. Also takes build_id and platform_id.
        (TestRunsGenerator::rollback_with_error): Moved.

2013-03-08  Ryosuke Niwa  <rniwa@webkit.org>

        SafariPerfMonitor: Administrative pages should update manifest JSON as needed.

        Reviewed by Remy Demarest.

        Regenerate the manifest file when updating fields or adding new items that are included in
        the manifest JSON.

        * public/admin/bug-trackers.php:
        * public/admin/builders.php:
        * public/admin/regenerate-manifest.php:
        * public/admin/repositories.php:
        * public/admin/tests.php:
        * public/include/admin-header.php:
        (regenerate_manifest): Extracted from regenerate-manifest.php.

2013-03-08  Ryosuke Niwa  <rniwa@webkit.org>

        Unreviewed build fix for memory test results.

        Make aggregation work in the nested cases. We start from the "leaf" tests and move our ways up,
        aggregating at each level.

        * public/api/report.php:
        (ReportProcessor::recursively_ensure_tests):
        (ReportProcessor::add_aggregated_metric): Renamed from ensure_aggregated_metric.
        (ReportProcessor::add_values_for_aggregation):
        (ReportProcessor::aggregate):
        (ReportProcessor::aggregate_current_test_level): Extracted from aggregate.

2013-03-02  Ryosuke Niwa  <rniwa@webkit.org>

        Build fixes. iteration_count_cache should be the total number of values in all iteration group,
        not the number of iteration groups. Also, don't set group number when the entire run belongs
        a single iteration group.

        * public/api/report.php:
        (ReportProcessor::commit):

2013-03-01  Ryosuke Niwa  <rniwa@webkit.org>

        SafariPerfMonitor: Introduce iteration groups

        Reviewed by Remy Demarest.

        In WebKit land, we're going to use multiple instances of DumpRenderTree or WebKitTestRunner to amortize
        the runtime environment variances to get more stable results. And it's desirable to keep track of
        the instance of DumpRenderTree or WebKitTestRunner used to generate each iteration value.

        This patch introduces "iteration groups" to keep track of this extra information.

        Instead of receiving a flat array of iteration values, we can now receive a two dimensional array where
        the outer array denotes iteration groups and each inner array contains iteration values for each group.


        * database/init-database.sql: Add iteration_group column.
        * public/api/report.php:
        (ReportProcessor::recursively_ensure_tests): Always use the two dimensional array internally.

        (ReportProcessor::aggregate): test_value_list_to_values_by_iterations now returns an associative array
        contains the list of values indexed by the iteration order and group sizes. Store the group size so
        that we can restore the iteration groups before passing it to node.js and restore them later.

        (ReportProcessor::test_value_list_to_values_by_iterations): Flatten iteration groups into an array
        of values and construct group_size array to restore the groups later in ReportProcessor::aggregate.

        Also check that each iteration group in each subtest are consistent with one another. To see why we need
        to do this, suppose we're aggregating two tests T1 and T2 with the following values. Then it's important
        that each iteration group in T1 and T2 have the same size:
        T1 = [[1, 2], [3, 4, 5]]
        T2 = [[6, 7], [8, 9, 10]]

        so that the aggregated result (the sum in this case) can have the same groups as in:
        T  = [[7, 9], [11, 13, 15]]

        If some iteration groups in T1 and T2 had a different size as in:
        T1 = [[1, 2, 3], [4, 5]]
        T2 = [[6, 7], [8, 9, 10]]

        Then iteration groups of the aggregated T is ambiguous.

        (ReportProcessor::compute_caches): Flatten iteration groups to compute caches (e.g. mean, stdev, etc...)
        (ReportProcessor::commit): Store iteration_group values.

2013-03-01  Ryosuke Niwa  <rniwa@webkit.org>

        Unreviewed. Delete the migration tool for webkit-perf.appspot.com now that we have successfully
        migrated to perf.webkit.org.

        * database/perf-webkit-migrator.js: Removed.

2013-03-01  Ryosuke Niwa  <rniwa@webkit.org>

        Build fix. Don't forget to add metrics of the top level tests e.g. Dromaeo:Time:Arithmetic.

        * public/index.html:
        (.showCharts):

2013-03-01  Ryosuke Niwa  <rniwa@webkit.org>

        SafariPerfMonitor: Make it possible to add charts for all subtests or all platforms.

        Reviewed by Ricky Mondello.

        It is often desirable to see charts of a given test for all platforms, or to be able to see
        charts of all subtests on a given platform when trying to triage perf. regressions.

        Support this use case by adding the ability to do so on the charts page.

        Also, we used to disable items on the test list based on the platform chosen. This turned out
        to be a bad UI because in many situations you want to be able to compare results of the same test
        on multiple platforms.

        In this new UI, we have three select elements, each of which selects the following:
        1. Top-level test - Test suite such as Dromaeo
        2. Metric - Pages and subtests under the suite such as www.webkit.org for dom-modify:Runs
           (where dom-modify is the name of the subtest and Runs is a metric in that subtest) for Dromaeo.
        3. Platform - Mountain Lion, Qt, etc...

        A user can select "all" for metric and platform but we disallow doing both at once since adding
        all metrics on all platforms tends to add way too many charts and hang the browser. I also can't
        think of a use case where you want to look at that many charts at once. We can support this later
        if valid use cases come up.

        * public/index.html:
        (.showCharts.addOption): Extracted.
        (.showCharts): Added "metricList" that shows the list of test and metrics (in the form of
        relative metrics paths such as "DOMWalk:Time") for each top-level test selected in testList.
        metricList has onchange handler that enables/disables items on platformList.
        
        (init): Sort tests and test metrics here instead of doing that in showCharts.

2013-02-28  Ryosuke Niwa  <rniwa@webkit.org>

        <rdar://problem/13316756> SafariPerfMonitor: tooltip should include a link to build URLs

        Reviewed by Remy Demarest and Ricky Mondello.

        Added a hyperlink to build page in tooltips. Repeating the entire build URL in each build
        was a bad idea because it bloats the resultant JSON file too much. So move the build URL
        templates to the manifest file instead. Each build now only contains the builder id.

        * public/api/runs.php: Removed the part of the query that joined builders table. This
        speeds up the query quite a bit.

        * public/include/manifest.php:
        (ManifestGenerator::generate): Generate builders field.
        (ManifestGenerator::builders): Added. Returns an associative array of builder ids to an
        associative array that contains name and its build URL template.

        * public/index.html:
        (.buildLabelWithLinks.linkifyIfNotNull): Renamed from linkifiedLabel. Take a label and url
        instead of a revision since this function is used for revisions and build page URLs now.
        (.buildLabelWithLinks): Include the linkified build number.

        * public/js/helper-classes.js:
        (TestBuild.builder): Added.
        (TestBuild.buildNumber): Added.
        (TestBuild.buildUrl): Returns the build URL. The variable name in the URL template has been
        changed from %s to $buildNumber to be more descriptive and consistent with other URL templates.

2013-02-27  Ryosuke Niwa  <rniwa@webkit.org>

        Tooltips interfere with user interactions

        Rubber-stamped by Simon Fraser.

        Disable tooltip on the dashboard page since graphs are too small to be useful there.
        Also, show graphs for only 10 days by default as opposed to 20.
        Finally, dismiss the hovering tooltip when mouse enters a "pinned" tooltip.

        * public/index.html:
        * public/js/helper-classes.js:

2013-02-24  Ryosuke Niwa  <rniwa@webkit.org>

        Fix some serious typo. We're supposed to be using SHA-256, not SHA-1 to hash our passwords,
        to be compatible with webkit-perf.appspot.com.

        * public/admin/builders.php:
        * public/api/report.php:

2013-02-23  Ryosuke Niwa  <rniwa@webkit.org>

        Unreviewed.

        Add a missing constraint on builds table. For a given builder, there should be exactly
        one build for a given build number.

        Also add report_committed_at to reports table to record the time at which a given report
        was processed and test_runs and run_iterations rows were committed into the database.

        * database/config.json:
        * public/api/report.php:

2013-02-22  Ryosuke Niwa  <rniwa@webkit.org>

        Unreviewed. Add more checks for empty SQL query results.

        * public/include/manifest.php:

2013-02-21  Ryosuke Niwa  <rniwa@webkit.org>

        More build fixes on perf.webkit.org.

        * public/api/runs.php: Make PostgreSQL happier.
        * public/include/manifest.php: Don't assume we always have bug trackers.

2013-02-21  Ryosuke Niwa  <rniwa@webkit.org>

        SafariPerfMonitor: index.html duplicates the code in PerfTestRuns to determine smallerIsBetter
        and fix other miscellaneous UI bugs.

        Rubber-stamped by Simon Fraser.

        Removed the code to determine whether smaller value is better or not for a given test in index.html
        in the favor of using that of PerfTestRuns.

        * public/include/manifest.php: Fixed a typo.
        * public/index.html:
        (Chart):
        (Chart.attachMainPlot): Fixed a bug to access previousPoint.left even when previousPoint is null.

        * public/js/helper-classes.js:
        (PerfTestRuns): Added EndAllocations, MaxAllocations, and MeanAllocations.

        (PerfTestRuns.computeScalingFactorIfNeeded): When the mean is almost 10,000 units, we may end up
        using 5 digits instead of 4, resulting in the use of scientific notations. Go up to the next unit
        at roughly 2,000 units to avoid this.

        (Tooltip.show): Show the tooltip even when the new content is identical to the previous content.
        The only thing we can avoid is innerHTML.

2013-02-21  Ryosuke Niwa  <rniwa@webkit.org>

        Another build fix. The path to node is /usr/local/bin/node, not /usr/bin/local/node

        * public/include/evaluator.js:

2013-02-21  Ryosuke Niwa  <rniwa@webkit.org>

        <rdar://problem/13267898> SafariPerfMonitor: Bug trackers should be configurable

        Reviewed by Remy Demarest.

        Made the list of bug trackers configurable. Namely, each bug tracker can be added in
        admin/bug-trackers.php and can be associated with multiple repositories.

        The association between bug trackers and repositories (such as WebKit, Safari, etc...) are used
        to determine the set of bug trackers to show for a given set of blame lists.
        e.g. if a test regressed due to a change in Safari, then we don't want to show WebKit Bugzilla as
        a place to file bugs against the regression.
F
        * database/init-database.sql: Added bug_trackers and tracker_repositories.
        Also drop those tables before creating them (note "DROP TABLE reports" was missing).

        * public/admin/bug-trackers.php: Added. The administrative interface for adding and managing
        bug trackers, namely associated repositories.

        * public/include/admin-header.php: Added a link to bug-trackers.php
        * public/include/manifest.php:
        (ManifestGenerator::generate): Include the list of bug trackers in the manifest.
        Also moved the code to fetch repositories table here from ManifestGenerator::repositories.

        (ManifestGenerator::repositories):

        (ManifestGenerator::bug_trackers): Added. Generates an associative array of bug trackers where
        keys are names of bug trackers and values are associative arrays with keys 'new_bug_url' and
        'repositories' where the latter contains the list of associated repository names.

        * public/index.html:
        (Chart): Takes bugTrackers as as argument.
        (Chart.showTooltipWithResults): Removed the hard-coded list.
        (init):
        (init.addPlatformsToDashboard):
        (init.showCharts.createChartFromListPair):
        (init): Stores the list of bug trackers in the manifest to a local variable.

2013-02-21  Ryosuke Niwa  <rniwa@webkit.org>

        A follow up on the previous build fix. When using proc_open, we need to make evalulator.js executable.

        * public/include/evaluator.js:

2013-02-21  Ryosuke Niwa  <rniwa@webkit.org>

        SafariPerfMonitor: Extract the code to generate tabular view in administrative pages

        Reviewed by Remy Demarest.

        Extracted AdministrativePage to share the code to generate a tabular view of data and a form to insert
        new row into the database.

        * public/admin/aggregators.php: Use AdministrativePage.
        * public/admin/builders.php: Ditto.
        * public/admin/repositories.php: Ditto.
        * public/include/admin-header.php:
        (AdministrativePage): Added.
        (AdministrativePage::__construct): column_info is an associative array that maps a SQL column name
        to an associative array that describes the column.
            - editing_mode: Specifies the type of form ('text', 'url', or 'string') to show for this column.
            - label: Human readable name of the column.
            - pre_insertion: Signifies that this column exists only before the row is inserted. e.g. password
              column exists only before we create password_hash column at the insertion time.

        (AdministrativePage::name_to_titlecase): Converts an underscored lowercase name to a human readable
        titlecase (e.g. new_bug is converted to New Bug).
        (AdministrativePage::column_label): Obtains the label specified in column_info or titlecased column name.
        (AdministrativePage::render_form_control_for_column): "Renders" a text form control such as input and
        textarea for a given editing mode ('text', 'url', or 'string').
        (AdministrativePage::render_table): Renders a whole SQL table after sorting rows by the specified column.
        (AdministrativePage::render_form_to_add): Renders a form to insert new row.

2013-02-20  Ryosuke Niwa  <rniwa@webkit.org>

        Build fix. Some systems don't support r+. Use proc_open instead.

        * public/api/report.php:

2013-02-15  Ryosuke Niwa  <rniwa@webkit.org>

        Build fix. Use the mean data series as supposed to upper or lower confidence bounds
        when computing the y-axis of data points to show tooltips at.

        * public/index.html:

2013-02-15  Ryosuke Niwa  <rniwa@webkit.org>

        Unreviewed. Removed .htaccess in favor of directly putting directives in httpd.conf.

        * Install.md:
        * public/.htaccess: Removed.

2013-02-14  Ryosuke Niwa  <rniwa@webkit.org>

        Unreviewed.

        * public/include/manifest.php: Build fix. db is on this.
        * public/js/statistics.js:
        (Statistics.confidenceInterval): Added. An utility function for debugging purposes.

2013-02-13  Ryosuke Niwa  <rniwa@webkit.org>

        <rdar://problem/13165667> SafariPerfMonitor doesn't work on perf.webkit.org (Part 2)

        Reviewed by Anders Carlsson.

        Rewrote and merged populate-from-report.js into report.php.

        * database/config.json: Added a path to node.js.

        * database/init-database.sql: Don't require unit to be always present since it's no longer used by the front end.
        Once we land this patch and update the administrative pages, we can remove this column.

        Also add a new reports table to store JSON reported by builders. We used to store everything in jobs table but
        that table is going away once we remove the node.js backend.

        * database/populate-from-report.js: Removed.
        * public/api/report.php: Added.
        (ReportProcessor):
        (ReportProcessor.__construct):
        (ReportProcessor.process):

        (ReportProcessor.store_report_and_get_build_data): We store the report into the database as soon as it has been
        verified to be submitted by a known builder.

        (ReportProcessor.exit_with_error): Store the error message and details in the database if the report had been
        stored. If not, then notify that to the client via 'failureStored' in the JSON response.
        (ReportProcessor.resolve_build_id): Insert build and build_revisions rows if needed. We don't do this atomically
        inside a transaction because there could be multiple reports for a single build, each containing results for
        different tests.

        (ReportProcessor.recursively_ensure_tests): Parse a tree of tests and insert tests and test_metrics rows as
        needed. It also computes the metrics to aggregate and prepares values to commit via ensure_aggregated_metric,
        add_values_to_commit, and add_values_for_aggregation.

        (ReportProcessor.is_list_of_aggregators): When a metric is an aggregation, it contains an array of aggregator
        names, e.g. ["Arithmetic", "Geometric"], instead of a dictionary of configuration types to their values,
        e.g. {Time: {current: [1, 2, 3,]}}. This function detects the former. (Note that dictionary and list are both
        array's in PHP).

        (ReportProcessor.ensure_aggregated_metric): Create a metric with aggregator to add it to the list of metrics
        to be aggregated in ReportProcessor.aggregate.

        (ReportProcessor.add_values_for_aggregation): Called by test metrics with aggregated parent test metrics.

        (ReportProcessor.aggregate): Compute results for aggregated metrics. Consider a matrix with rows representing
        child tests and columns representing "iterations" for a given aggregated metrics M. Initially, we have values
        given for each row (child metrics of M). This function extracts each column (iteration) via
        test_value_list_to_values_by_iterations, and feeds it into evaluate_expressions_by_node to get aggregated values
        for each column (iteration of M). Finally, it registers those aggregated values to be committed.

        Note that we don't want to start a new node.js process for each aggregation, so we accumulate all values to be
        aggregated in node.js in $expressions. Each entry in $expressions is a JSON string that contains code and
        values to be aggregated. node.js gives us back a list of JSON strings that contain aggregated values.

        (ReportProcessor.test_value_list_to_values_by_iterations): See above.
        (ReportProcessor.evaluate_expressions_by_node): See above.

        (ReportProcessor.compute_caches): Compute cached mean, sum, and square sums for each run we're about to add
        using evaluate_expressions_by_node. We can't do this before computing aggregated results since those aggregated
        results also need the said caches.

        (ReportProcessor.add_values_to_commit):

        (ReportProcessor.commit): Add test_runs and run_iterations atomically inside a transaction, rolling back
        the transaction as needed if anything goes wrong.

        (ReportProcessor.rollback_with_error)
        (main):
        * public/include/db.php:
        (Database.prepare_params): Use $values (instead of $placeholders) to compute the current index since
        placeholders ($1, $2, etc...) may be split up into multiple arrays given they may not necessarily show up
        contiguously in a SQL statement.

        (Database.select_or_insert_row): Added. Selects a row if the attempt to insert the same row fails. It
        automatically creates a query string from a dictionary of unprefixed column names and table. It returns
        a column value of the choice.

        (Database.begin_transaction): Added.
        (Database.commit_transaction): Added.
        (Database.rollback_transaction): Added.

        * public/include/evaluator.js: Added.
        * public/include/json-header.php:
        (exit_with_error): Take error details and merge it with "additional details". This allows report.php to provide
        context under which the request failed.
        (successful_exit): Merge "additional details".
        (set_exit_detail): Added. Sets "additional details" to the JSON returned by exit_with_error or successful_exit.
        (merge_additional_details):

2013-02-12  Ryosuke Niwa  <rniwa@webkit.org>

        SafariPerfMonitor: Add more helper functions to db.php

        Reviewed by Remy Demarest.

        Added Database::insert_row and array_get to make common database operations easier.

        * public/admin/aggregators.php: Use Database::insert_row instead of
        execute_query_and_expect_one_row_to_be_affected.

        * public/admin/builders.php: Ditto.

        * public/admin/tests.php: Ditto; We used to run a separate SELECT query just to get the id after
        inserting a row. With insert_row, we don't need that.

        * public/include/admin-header.php: Ditto.

        * public/include/db.php:
        (array_get): Added. It returns the value of an array given a key if the key exists; otherwise
        return the default value (defaults to NULL) if the key doesn't exist.

        (Database::column_names): Added. Prefixes an array of column names and creates a comma separated
        list of the names.

        (Database::prepare_params): Added. Takes an associative array of column names and their values,
        and builds up arrays for placeholder (e.g. $1, $2, etc...) and values, then returns an array of
        column names all in the same order.

        (Database::insert_row): Added. Inserts a new row into the specified table where column names have
        the given prefix. Values are given in a form of an associative array where keys are unprefixed
        column names and values are corresponding values. When the row is successfully inserted, it returns
        the specified column's value (defaults to prefix_id). If NULL is specified, it returns a boolean
        indicating the success of the insertion.

2013-02-11  Ryosuke Niwa  <rniwa@webkit.org>

        <rdar://problem/13165667> SafariPerfMonitor doesn't work on perf.webkit.org (Part 1)

        Reviewed by Conrad Shultz.

        Rewrote the manifest generator in PHP.

        * database/generate-manifest.js: Removed.
        * public/admin/regenerate-manifest.php: Added. Use ManifestGenerator to generate and store the manifest.
        * public/include/db.php:
        (array_ensure_item_has_array): Added.
        * public/include/evaluator.js: Added.
        * public/include/json-header.php:
        * public/include/manifest.php: Added.

2013-02-11  Ryosuke Niwa  <rniwa@webkit.org>

        Dates on overflow plot are overlapping

        Rubber-stamped by Simon Fraser.

        Don't show more than 5 days.

        * public/index.html:
        * public/js/helper-classes.js:
        (TestBuild.UTCtoPST):
        (TestBuild.now):

2013-02-07  Ryosuke Niwa  <rniwa@webkit.org>

        Show build time as well as commit time on the dashboard and tooltips.

        Rubber-stamped by Simon Fraser.

        Include both the maximum commit time and build time in buildLabelWithLinks.
        Also use ISO format to save the screen real estate.

        * public/index.html:
        (buildLabelWithLinks):
        * public/js/helper-classes.js:
        (TestBuild):
        (TestBuild.buildTime):
        (TestBuild.formattedBuildTime):